Details
Bosch LTC 0630 Series Dinion2X Day/Night Camera
LTC 0630/11 Key Features
- Advanced Image Processing Technology
- Improved XF-Dynamic engine with SmartBLC
- Detail enhancement
- True Day/Night performance with switchable filter
- 1/2-inch CCD sensor
- 12/24V
LTC 0630/11 Description
The LTC 0630 Dinion2X Day/Night camera is a high performance, surveillance
camera. It uses a 1/2-inch CCD sensor and incorporates advanced digital signal
processing for outstanding picture performance. The advanced image processing
enhances sensitivity; the improved XF-Dynamic engine extends the dynamic range.
This unique combination provides a sharper, more detailed image with outstanding
accuracy in colour reproduction even under harsh lighting conditions.
The Dinion2X camera is easy to install and ready to use, and offers the best
solution for demanding scene conditions. The day/night feature ensures the
highest image quality possible at any time. Depending on the available light the
camera will automatically switch from colour to monochrome.
All Dinion cameras are supplied ready to operate. Simply attach the lens,
connect video and then power. Six distinct pre-programmed operational modes are
stored in the camera. Recall the mode that suits your application for optimized
performance.
The camera automatically detects the lens type. The lens wizard ensures accurate
back-focusing for perfectly sharp pictures at all times. For especially
challenging situations where fine tuning or special settings are required, the
camera parameters can be individually set using the control buttons on the side
of the camera and an On-screen Display (OSD).
LTC 0630/11 Functions
XF-Dynamic and Image Processing Improved XF-Dynamic technology and highly
accurate digital signal processing optimally captures the detail in both bright
highlights and deep shadows simultaneously. The Dinion2X maximizes the
information visible in the picture even with strong backlighting.
SmartBLC
Turn on SmartBLC to automatically compensate the image without the need for
complicated set-up.
Detail Enhancement
Features such as Autoblack and Sharpness further improve the details in a scene,
pixel by pixel.
Day/Night Mode
The day/night mode provides enhanced night viewing by increasing the IR
sensitivity. The IR filter can switch from colour to monochrome automatically by
either sensing the illumination level or via the alarm input. The filter can be
switched manually via the alarm input, through the camera menu or via the Bilinx
coaxial control interface. An internal through-the-lens IR detector enhances the
monochrome mode stability, as it prevents reverting to the colour mode when IR
illumination is dominant. IR contrast is also measured and used to handle
reflected IR light in outdoor scenes.
Privacy masking
Four different privacy zones allow specific parts of a scene to be blocked.
Pre-program any part of the scene to be masked.
Default Shutter
The default shutter speed captures fast moving objects when sufficient light is
available. When light levels fall and other adjustments have been exhausted, the
shutter speed reverts to a standard setting to maintain sensitivity.
Bilinx Technology
Bilinx is a bidirectional communication capability embedded in the video signal
of all Bosch Dinion cameras. Technicians can check status, change camera
settings and even update firmware from virtually anywhere along the video cable.
Bilinx reduces service and installation time, provides for more accurate setup
and adjustment, and improves overall performance. In addition, Bilinx uses the
standard video cable to transmit alarm and status messages, providing superior
performance without additional installation steps.
Lens Wizard
The Lens Wizard automatically detects the lens type and helps focus the lens at
the maximum opening to ensure proper focus is maintained throughout the 24-hour
cycle. No special tools or filters are required.
Ease of installation
Several features are available that make installation easy:
• Power and alarm connections have cable connectors which can be removed even
when the camera is mounted.
• A built-in test pattern generator produces signals to test and fault-find
cables.
• A multi-language On-Screen Display (OSD) increases user compatibility.
Programmable Modes
Six independent, pre-programmed operating modes support typical applications,
but are fully programmable for individual situations. Switching between modes is
easy via Bilinx or the external alarm input.
High efficiency
A high efficiency power supply improves maximum operating temperature.
Video Motion Detection
The built-in video motion detector allows you to select a programmable area with
individual thresholds. The global scene change detector minimizes false alarms
caused by sudden lighting condition changes, such as switching on or off the
indoor or security lighting. When motion is detected, alarms can be displayed in
the video signal, the output relay can be closed or an alarm message can be
transmitted via Bilinx.
SensUp Dynamic
By increasing the integration time up to 10 times on the CCD, the effective
sensitivity is dramatically enhanced. This is especially useful when relying
only on moonlight for illumination.
Typical applications:
• Outdoor perimeters
– low light
– IR light
• Traffic monitoring
– highway
– traffic intersections
– emergency response coordination
• Tunnels
• Car parks (outdoor)
• Restricted access locations such as:
– prisons
– ports / freight terminals
– military facilities
– border control and homeland security
• Casino and gambling centres.
LTC 0630/11 Specification
CCD Type | 1/2-inch interline |
Active Pixels | |
PAL Model: | 752 x 582 |
NTSC Model | 768 x 494 |
Sensitivity (3200 K, scene reflectivity 89%, F1.2) | |
Full video (100 IRE) | Usable picture (50 IRE) , Usable picture (30 IRE) |
Color | 1.40 lx (0.13 fc) , 0.31 lx (0.029 fc) , 0.0991 lx (0.0097 fc) |
Color + SensUp 10x | 0.14 lx (0.013 fc) , 0.031 lx (0.0029 fc) , 0.00991 lx (0.0009 fc) |
Monochrome | 0.57 lx (0.053 fc) , 0.121 lx (0.0112 fc) , 0.0391 lx (0.0036 fc) |
Monochrome + SensUp 10x | 0.057 lx (0.0053 fc) , 0.0121 lx (0.00112 fc) , 0.00391 lx (0.00036 fc) |
Horizontal Resolution | 540 TVL |
Signal-to-Noise Ratio | >50 dB |
Video Output | Composite video 1 Vpp, 75 ohm |
Synchronization | Internal, Line Lock, HV-lock and Genlock (Burst lock) selectable |
Shutter | Auto (1/50 [1/60] to 1/10000) selectable Auto (1/50 [1/60] to 1/50000) automatic flickerless, fixed selectable |
Sensitivity up | Adjustable from Off up to 10x |
Day/Night | Color, Mono, Auto |
Auto Black | Automatic continuous, Off |
Dynamic engine | XF-Dynamic, SmartBLC |
Dynamic range | 96 dB (16-bit image processing) |
Dynamic Noise Reduction | Auto, On/off selectable |
Sharpness | Sharpness enhancement level selectable |
SmartBLC | On/Off |
AGC | AGC On or Off (0 – 30 dB) selectable |
Peak White Invert | On/Off |
White Balance | ATW, ATWhold and manual (2500 to 10000K) |
Alarm Output | VMD or Bilinx |
Alarm Input (TTL) | Profile switching, +3.3 V nominal, +40 VDC max. |
Alarm Output Relay | 30 VAC or +40 VDC, Max 0.5 A continuous, 10 VA |
External Synchronization Input | 75 ohm or high impedance selectable |
Cable Compensation | Up to 1000 m (3000 ft) coax without external amplifiers (automatic set-up in combination with Bilinx coaxial communication) |
Camera ID | 17 character editable string, position selectable |
Test Pattern Generator | Color bars 100%, Greyscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV plane |
Lens Types | Manual, DC- and Video-Iris auto-detect with override DC-iris drive: max. 50 mA continuous Video-iris: 11.5 VDC ±0.5, max. 50 mA continuous |
Lens Mount | CS (max lens protrusion 5 mm, 0.2 inch), C-mount compatible with supplied adapter ring |
Modes | 6 preset programmable modes |
Remote Control | Bilinx coaxial bi-directional communication |
Video Motion Detection | One area, fully programmable |
Privacy Masking | Four independent areas, fully programmable |
Controls | OSD with soft-key operation (multi-lingual) |
Dimensions (H x W x L) | 58 x 66 x122 mm (2.28 x 2.6 x 4.8 inch) without lens |
Weight | 450 g (0.99 lbs) without lens |
Color | RAL 9007 Metallic Titanium |
Tripod Mount | Bottom (isolated) and top 1/4-inch 20 UNC |
Operating Temperature | -20°C to +55°C (-4°F to 131°F) |
Storage Temperature | -40°C to +70°C (-40°F to +158°F) |
Operating Humidity | 20% to 93% RH |
Storage Humidity | up to 98% RH |
Lens Optional