Details
Bosch LTC 8561, LTC 8564/20, LTC 8566 Series Single-channel On-site Receiver/Drivers
LTC 8561, LTC 8564/20, LTC 8566 Series Key Features
• | Full-featured pan/tilt/zoom/aux control |
• | Auto-pan/random pan |
• | Bi-Phase or RS-232 data input |
• | 99 Pre-positions with tour capability |
• | Pre-positions compatible with 360° continuous pan/tilt drives |
LTC 8561, LTC 8564/20, LTC 8566 Series Description
The LTC 8561 Series, LTC 8564/20, and LTC 8566 Series On-site Receiver/Drivers
are control data decoder units and motor drivers for pan/tilt units and zoom
lenses. These receiver/drivers are used in conjunction with Allegiant® Series
Microprocessorbased Switcher/Controller Systems.
The receiver/driver decodes Allegiant Bi-Phase control data from the
switcher/controller system through the LTC 8568/00 Signal Distribution Units
into specific control codes. In addition, the receiver/driver will accept RS-232
control code data generated by the LTC 8780 Series Data Converter Unit.
These receiver/drivers are available in a variety of input and output voltage
configurations. All units are 50/60 Hz line frequency compatible. All units have
low voltage DC lens drivers (6 volts or 12 volts selectable) for focus, zoom,
and iris with adjustable speed. There are also four auxiliary outputs. One is a
solid state relay with zero crossing switching fixed to the same voltage as the
pan/tilt output. The others are relays which can supply voltage through contacts
(normally open or normally closed) to control lights or other devices at the
remote site. Auxiliary supply terminals provide power which is fuse-protected at
the voltage of the pan/tilt output.
Advanced features include 99 pre-positions when using conventional 355° pan/tilt
drivers, 82 prepositions when using 360° continuous pan/tilt drivers, installer
friendly connectors, lockable enclosure latches, 10-bit resolution for improved
pan/tilt preposition accuracy, and automatic pre-position tour capability.
Additional features include a full operating temperature range, an integral
local test function, an unrestricted auto-pan feature for all models of
pan/tilts, random pan, a unique dither feature, selectable latching or momentary
auxiliaries, polarity reversible lens drive, convenient thumbwheel selectable
camera addressing, and a NEMA-4X, IP66 rated environmental enclosure.
LTC 8561, LTC 8564/20, LTC 8566 Series Ordering
information
Product Code | Description |
LTC 8561/50 | Single-channel On-site Receiver/Driver 230 VAC pan/tilt voltage, 230 VAC power supply, with auxiliary, 50°Hz |
LTC 8561/60 | Single-channel On-site Receiver/Driver 120 VAC, 50/60 Hz, 100 to 130 V; Pan/Tilt, Aux 1, and Aux Supply: 120 VAC, 50/60 H |
LTC 8564/20 | Single-channel On-site Receiver/Driver 24 VAC, 50/60 Hz, 20 to 28 V; Pan/Tilt, Aux 1, and Aux Supply: 24 VAC, 50/60 Hz |
LTC 8566/50 | Single-channel On-site Receiver/Driver 230 VAC, 50/60 Hz, 198 to 264 V; Pan/Tilt, Aux 1, and Aux Supply: 24 VAC, 50/60 Hz |
LTC 8566/60 | Single-channel On-site Receiver/Driver 120 VAC, 50/60 Hz, 100 to 130 V; Pan/Tilt, Aux 1, and Aux Supply: 24 VAC, 50/60 Hz |