Details
Bosch MIC IP starlight 7000i Camera
MIC-7502-Z30 Key Features
- Exceptional strength and ruggedness for any outdoor application including traffic monitoring (bridges, tunnels, or highways), perimeter protection, city surveillance, and mining
- Built-in Intelligent Video Analytics alert operators in case of unusual scene activity
- Edge intelligence with Intelligent Tracking and object detection even when the camera is moving
- Starlight camera technology with excellent low-light sensitivity (color = 0.0077 lx) and High dynamic range (120 dB) (to see details in bright and dark areas simultaneously)
- Optional, variable beam illuminator with multi spectrum LEDs ensures that IR light (up to 450 m (1476 ft)) is uniformly distributed in the field to avoid dark spots or an over-illuminated scene
MIC-7502-Z30 Description
The MIC IP starlight 7000i camera
is an advanced PTZ surveillance platform for mission-critical applications. With
starlight imaging technology and excellent lowlight sensitivity, the MIC IP
starlight 7000i camera is the perfect solution for robust and high-quality
imaging needs.
The camera’s true advantage is its rugged design combined with Intelligent Video
Analytics developed specifically for the most demanding environments. The camera
is well-suited for extreme environments and adverse weather conditions such as
high winds, rain, fog, ice, and snow. The camera operates at extreme
temperatures ranging from -40 °C to +65 °C (-40 °F to +149 °F). Even in extreme
conditions and challenging illumination scenarios, the camera provides the
highest-quality video images and relevant data interpreted directly at the
source. H.265 compression technology, Intelligent Dynamic Noise Reduction and
dynamic Encoder Regions contribute to bit rate saving.
MIC-7502-Z30 Functions
Exceptional low-light performance
The latest sensor technology combined with the sophisticated noise suppression
results in an exceptional sensitivity in color. The low-light performance is so
good that the camera continues to provide excellent color performance even with
a minimum of ambient light.
High dynamic range
The dynamic range of the camera is outstanding and is obvious in real-world
performance comparisons. In extended dynamic range mode, the camera uses an
electronic shutter to capture four images with different exposure time and
reproduce a high-contrast frame. The result is that you can view details in both
the bright areas (highlights) and the dark areas (shadows) of a scene at the
same time. You can easily distinguish objects and features (for example, faces)
with bright backlight.
Ruggedized design for extreme applications
The camera is designed to last in surveillance applications that are beyond the
mechanical capabilities of conventional positioning systems. The complete metal
body has been engineered to withstand high-impact or continuous low-frequency
vibration. The camera models comply to IK10 rating for impact resistance and to
the IEC 60068 standards applicable to vibration and shock.
The closed-loop PTZ positioning system allows the camera to maintain its
position under continuous vibration or after an extreme shock event, even
without homing or pre-position calibration. The camera benefits from Bosch
domain knowledge in material engineering and coatings. As a result, the superior
metallurgy and the finish of the camera provide unprecedented protection against
corrosion. The camera has been tested for 2000 hours of salt spray per the ASTM
B117 standard.
Robust design rated to an industry-leading IP68, Type 6P, IK10
Subjected and certified to rigorous dust and immersion tests (IP68, Type 6P) and
impact test (IK10), MIC cameras are perfectly suited for installation in even
the most unforgiving environments. The cameras’ aluminum housing receives a
corrosion protection surface treatment, along with robust, powder coat paint.
Reliable O-ring seals completely protect the internal components from the
external environment, meaning that there is no need to pressurize the camera. To
guarantee unit integrity, the factory tests each MIC camera for leaks before
shipping.
Pan and tilt drive and mechanism
The pan and tilt mechanism is a ruggedized, directdrive system. The brushless
motors directly control the pan and tilt movement using a finely-tuned gear
train designed to minimize backlash and support continuous operation without
significant wear and tear.
With a full 360º continuous rotation pan and 290º tilt control (on upright
models without illuminators) and super-quick pan (120°/second) and tilt
(90°/second) for exceptional viewing capability, the camera outperforms other
cameras in its class.
Dual-mode Illumination
The field-installable MIC illuminator accessory (sold separately) consists of
covert IR LEDs, visible IR LEDs, and White light LEDs. IR LEDs enable Detection
of objects 450 m (1476 ft) away.
The following table identifies the application for each type of LED.
Application | Type of illuminator |
Close-range covert illumination | 940 nm IR LEDs |
Long-range detection | 850 nm IR LEDs |
Identification and deterrent | White light LEDs |
The MIC camera can steer the IR beam dynamically to match the illumination
intensity with the camera’s field of view according to the zoom level.
Beam intensity is controlled automatically or manually, depending on user
preference. Decreasing intensity reduces overexposure.
The patented, integrated Constant Light technology delivers a consistent level
of illumination performance throughout the life of the product, even in
fluctuating temperatures.
White light mode allows operators to capture full scene details in color or use
the light as a deterrent effect.
H.265 high-efficiency video encoding
The camera is designed on the most efficient and powerful H.264 and H.265/HEVC
encoding platform. The camera is capable of delivering high-quality and
high-resolution video with very low network load. With a doubling of encoding
efficiency, H.265 is the new compression standard of choice for IP video
surveillance systems.
Intelligent streaming
Smart encoding capabilities, together with Intelligent Dynamic Noise Reduction
technology and analytics, make the bandwidth consumption drop to extremely low
levels. Only relevant information in the scene, like motion, or objects found
with the analytics, need to be encoded.
The camera is capable of quad streaming which allows the camera to deliver
independent, configurable streams for live viewing, recording, or remote
monitoring via constrained bandwidths.
Intelligent Video Analytics on the edge
The camera includes the latest release of Intelligent Video Analytics
application for use on prepositions.
Designed for mission-critical applications, the video analytics can reliably
detect, track, and analyze moving objects while suppressing unwanted alarms from
spurious sources in the image, even in harsh weather conditions.
Advanced tasks like multiple line crossing, loitering, idle / removed object
detection, crowd density estimation, occupancy and people counting are available
for live alarming and forensic search. Object filters based on size, speed,
direction, aspect ratio, and color can be defined.
A simplified calibration mode reduces installation time significantly, because
you only need to enter the installation height once for each camera, independent
of pre-positions.
After the camera is calibrated, the analytics engine can automatically classify
objects as upright person, car, bike, or truck.
Video analytics while camera is moving Outside of pre-positions and even while
the PTZ camera is moving, whether on guard tours or manually, the Intelligent
Video Analytics application can now detect and alarm when objects are in alarm
fields. These alarm fields are defined once across all PTZ camera views. Any
part of those alarm fields that is currently within the cameras view becomes
active. Thus, guard tours sweeping across the monitored areas in order to
provide an intruder less time to slip by can now automatically alarm on those
intruders as well.
Intelligent Tracking
When the Intelligent Video Analytics application in the camera detects objects
or individuals, the camera can automatically activate the Intelligent Tracking
feature, which controls the pan/tilt/zoom actions of the camera to track objects
and keep them in view. The newest generation of the Intelligent Tracking feature
ensures smoother camera motion for more comfortable viewing and more reliably
tracking objects even under challenging scenes.
Areas with potentially interfering background motion (moving trees, pulsating
lights, and busy roads) can be masked out.
The camera supports 2 Intelligent Tracking modes:
• Auto mode: In this mode, the camera follows any
object that has triggered an alarm in the Intelligent Video Analytics
application. This mode is most useful for scenarios where the alarm cases can be
clearly defined, for example, when no motion is expected at all.
• Click mode: In this mode, users can click on any object detected by the
Intelligent Video Analytics application to enable the camera to track the
movement of the selected object. This mode is most useful for scenarios where
normal scene activity is expected.
Image Stabilization
As PTZ cameras continue to increase their optical zoom capabilities, image
stabilization becomes critical to eliminate movement caused by unstable camera
mounts. Minor movement of the camera mount can shift the field of view by a
large distance when the camera is zoomed to a high value. This can render images
unusable. The camera incorporates an Image Stabilization algorithm that allows
the camera to detect continuous vibration. If it detects vibration, the camera
dynamically corrects the shaky video in both the vertical and horizontal axis,
resulting in exceptional image clarity and a stable field of view on the
monitor.
Data security
Special measures are necessary to ensure the highest level of security for
device access and data transport. On initial setup, the camera is only
accessible over secure channels. You must set a service-level password in order
to access camera functions.
Web browser and viewing client access can be protected using HTTPS or other
secure protocols that support state-of-the-art TLS 1.2 protocol with updated
cipher suites including AES encryption with 256 bit keys. No software can be
installed in the camera, and only authenticated firmware can be uploaded. A
threelevel password protection with security recommendations allows users to
customize device access. Network and device access can be protected using 802.1x
network authentication with EAP/TLS protocol. Superior protection from malicious
attacks is guaranteed by the Embedded Login Firewall, on-board Trusted Platform
Module (TPM) and Public Key Infrastructure (PKI) support.
The advanced certificate handling offers:
• Self-signed unique certificates automatically created when required
• Client and server certificates for authentication • Client certificates for
proof of authenticity • Certificates with encrypted private keys System
integration and ONVIF conformance The camera conforms to the Open Network Video
Interface Forum (ONVIF) Profile S and Profile G specifications. For H.265
configuration the camera also supports Media Service 2 which is part of the
future ONVIF Profile T. Compliance with these standards guarantees
interoperability between network video products regardless of manufacturer.
Third-party integrators can easily access the internal feature set of the camera
for integration into large projects. Visit the Bosch Integration Partner Program
(IPP) website (ipp.boschsecurity.com) for more information.
Ease of installation
The camera has been designed for quick and easy installation, a key feature from
Bosch IP video security products.
The camera supports mounting in upright, inverted, or canted orientation. The
field-selectable canting option allows the upper section of the camera to be
tilted down at a 45° angle. This is very useful for installations that require a
view of the scene directly under the camera.
Power options
The camera can be powered by a network compliant to High Power-over-Ethernet
using a Bosch model of High PoE Midspan (sold separately) or other device known
to be compatible. With this configuration, only a single (Cat5e/Cat6e) cable
connection is required to view, to power, and to control the camera. For maximum
reliability, the camera can operate with a redundant power system of a High PoE
Midspan and a separate 24 VAC power source connected simultaneously. If either
the High PoE or 24 VAC power source fails, the camera seamlessly transitions to
the remaining power source.
The 60 W midspan (NPD-6001A) can supply power to models without an illuminator
accessory. The 95 W midspan (NPD-9501A) can supply power to all models of MIC IP
starlight 7000i, including models with the illuminator accessory.
The camera can also accept a standard 24 VAC power source if a High PoE network
interface will not be used. User-supplied wiring must be in compliance with
electrical codes (Class 2 power levels). Refer to the table in the
Installation/configuration notes section for more information.
Camera Diagnostics
The camera has several built-in sensors / advanced diagnostics that display
warnings on the camera’s OSD about the health of the camera. The diagnostics log
records the events such as:
• Low voltage - a drop in incoming power below the level where the camera
becomes non-functional
• High temperature - the internal temperature exceeds specifications
• Low temperature - the internal temperature exceeds minimum levels
• High humidity - the internal humidity exceeds 70%
• High vibration - the acceptable level of acceleration forces was exceeded
• Total hours of camera operation
• Illuminator aging history
Certain events also appear on the camera’s OSD.
These diagnostic records are available for the
installation or service technician to review.
MIC-7502-Z30 Specification
Imager | 1/2.8-type Exmor R CMOS sensor |
Effective Picture Elements (Pixels) | 1945 x 1097 (2.13 MP) |
Lens | 30x motorized Zoom4.3 mm to 129 mmF1.6 to F4.7 |
Field of View (FOV) | 2.3° to 63.7° |
Focus | Automatic with manual override |
Iris | Automatic with manual override |
Digital Zoom | 12x |
Video performance - Sensitivity | |
(3100K, reflectivity 89%, 1/30, F1.6, 30 IRE) | |
Color | 0.0077 lx |
Monochrome | 0.0008 lx |
Gain control | AGC, Fixed |
Aperture Correction | Horizontal and vertical |
Electronic Shutter Speed (AES) | 1/1 sec to 1/10000 sec (22 steps) |
Signal-to-Noise Ratio (SNR) | >55 dB |
Day/Night switch | Automatic IR cut filter |
Backlight compensation (BLC) | On / Off / Intelligent Auto Exposure (IAE) |
White balance | 2000 K to 10,000 K ATW, AWB Hold, Extended ATW, Manual, Sodium Lamp Auto, Sodium Lamp |
Day/Night | Monochrome, Color, Auto |
Defog mode feature | Improves visibility when viewing foggy or other low-contrast scenes. |
High dynamic range (HDR) | 120 dB (25/30 fps) |
Noise Reduction | Intelligent Dynamic Noise Reduction |
Image Stabilization | On, Off, Auto |
DORI | DORI definition , Distance to Object |
WIDE 1X | TELE 30X , Scene width |
Detect | 25 px/m(8 px/ft) , 62 m(203 ft) , 1913 m(6276 ft) , 77 m(252 ft) |
Observe | 63 px/m(19 px/ft) , 25 m(81 ft) , 765 m(2510 ft) , 31 m(100 ft) |
Recognize | 125 px/m(38 px/ft) , 12 m(41 ft) , 383 m(1255 ft) , 15 m(50 ft) |
Identify | 250 px/m(76 px/ft) , 6 m(20 ft) , 191 m(628 ft) , 8 m(25 ft) |
Analysis type | Intelligent Video Analytics |
Configurations | Off / Global VCA / Profiles 1 - 16 |
Calibration | Automatic self-calibrating when height is set |
Alarm rules (combinable) | Any object Object in field Crossing line Entering field Leaving field Loitering Following route Idle object Removed object Counter Occupancy Crowd detection Condition change Similarity search Tampering |
Object filters | Duration Size Aspect ratio v/h Speed Direction Object classes (Upright persons, Bikes, Cars, Trucks) Color |
Standard/Video compression | H.265, H.264 (ISO/IEC 14496), M-JPEG, JPEG |
Streaming | Independent H.264 and H.265 streams 3 encoder instances of H.264 or H.265 stream |
Resolutions (H x V) | |
1080p HD | 1920 x 1080 |
720p HD | 1280 x 720 |
1.3 MP 5:4 (cropped) | 1280x 1024 |
D1 4:3 (cropped) | 704 x 480 |
640x 480 | 640x 480 |
432p SD | 768 x 432 |
288p SD | 512 x 288 |
144p SD | 256 x 144 |
Protocols | IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, ARP, DHCP, APIPA (Auto-IP, link local address), NTP (SNTP), SNMP (V1, V3, MIB-II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox™, CHAP, digest authentication |
Ethernet | 10BASE-T/100BASE-TX, auto-sensing, half/full duplex |
Encryption | TLS 1.2, SSL, DES, 3DES, AES |
Ethernet connector | RJ45 |
GOP Structure | IP, IBP, IBBP |
Data Rate (H.265, 1080P) | 61 kbps to 2.8 Mbps (depending on the scene, the frame rate, and the quality settings) |
Overall IP Delay | 60fps: 200ms (typical) |
Connectivity | ONVIF Profile SONVIF Profile GAuto-MDIX |
FPS | 1080p , 720p |
H.264 | H.265 , H.264 , H.265 |
60 | 4200 , 1649 , 2600 , 1249 |
30 | 2600 , 1413 , 1300 , 1096 |
15 | 2100 , 1157 , 1100 , 902 |
12 | 1800 , 1075 , 1000 , 841 |
5 | 1250 , 746 , 600 , 597 |
2 | 500 , 407 , 270 , 343 |
Sectors / Title | 4, 8, 12, or 16 user-selectable, independent Sectors, each with 20 characters per Title |
Privacy Masks | 24 individually configurable Privacy Masks; maximum 8 per Pre-position; programmable with 3, 4 or 5 corners; selectable color of Black, White, Gray, “Auto” (average background color) |
Virtual Masks | 24 individually configurable Virtual Masks to hide parts of the scene (background motion such as moving trees, pulsating lights, busy roads, etc.) which should not be considered for flow analysis to trigger Intelligent Tracking. |
Pre-positions | 256 Pre-positions, each with 20 characters per Title |
Guard Tours | Custom Recorded Tours - two (2), total duration 30 minutes: Pre-position tour - one (1), consisting of up to 256 scenes consecutively, and one (1) customized with up to 64 user-defined scenes |
Supported Languages | English, Czech, Dutch, French, German, Italian, Polish, Portuguese, Russian, Spanish, Japanese, Chinese |
Washer Pump Interface | Control functions integrated. MIC Alarm/Washer Interface Unit (MIC-ALM-WAS-24, sold separately) provides electrical interface to user supplied washer pump device. |
Camera status monitoring | Integrated sensors monitor operational status such as internal temperature, humidity level, incoming voltage level, vibration, and shock events. |
Drive Unit | Brushless, integral pan/tilt motor drive |
Supported mounting orientation | UprightInvertedCanted |
Pan Range | 360° continuous rotation |
Tilt Angle | Without illuminators (camera upright): 290°Without illuminators (Inverted): 250°With illuminators: 186.6° |
Tilt Range | Upright/Inverted: -55° - +90°Canted: -90° - +90° |
Variable Pan Speed | 0.2°/second - 120°/second |
Variable Tilt Speed | 0.2°/second - 90°/second |
Intelligent Tracking Speed | >0.2°/second (minimum) |
Pre-position Speed | 120°/second |
Pre-position Accuracy | Without illuminators:+/-0.06°With illuminators: +/-0.07° |
Proportional Pan / Tilt to Zoom | Yes |
Audible Noise | <65 dB |
Input Voltage | 21-30 VAC, ±10%, 50/60 Hz, and/or High Power over Ethernet (56 VDC nominal) |
Power Consumption (typical) | Without illuminator: 40 WWith illuminator: 70 W |
Current Consumption | 40 W (24 VAC): 2.4A 70 W (24 VAC): 4.1A 40 W (High PoE): 0.9A 70 W (High PoE): 1.25A |
Redundant configuration | Connect both a High PoE Midspan and a separate 24 VAC power source. If either the High PoE or the 24 VAC power source fails, the camera seamlessly transitions over to use the remaining power source. |
Surge protection | Built-in surge protection for power, data, and network interfaces |
Accessory Interface/Control Data | RS-485, Simplex, half and full duplex, user-selectable baud rate or auto-baudUsed to communicate with optional MIC Alarm/Washer Interface box (MIC-ALM-WAS-24) or Bosch OSRD, Pelco P/D, Forward Vision, and Cohu serial protocols. |
Power, pigtail | 24 VAC (nominal) |
Chassis ground | Ground wire with connector lug |
Power, Network | Without illuminator: RJ45 100BASE-TX Ethernet High PoE Midspan - 60 W (NPD-6001B) or 95 W (NPD-9501A) With illuminator: 95 W High PoE Midspan (NPD-9501A)* |
Power, Camera | 24 VAC (power supply) |
Video and Control | RJ45 100BASE-TX Ethernet RS-485 Simplex 9600 baud (dedicated for MIC-ALM-WAS-24) |
Alarm/Washer | 3-wire RS-485 |
* Must purchase either NPD-9501A or VIDEOJET connect 7000 (VJC-7000-90) in order to use the High PoE solution. | |
Serial protocols | Bosch OSRD, Pelco P/D, Forward Vision, and Cohu(Note: For Pelco, Forward Vision, and Cohu protocols, a separate license (MVS-FCOM-PRCL) is required.) |
Ingress Protection Rating/Standard | IEC 60529 IP68 / Type 6P (dust and immersion) when installed on a MIC-DCA or on a MIC wall mount IP67 (moisture and dust) rating on connectors in the base of the camera when using the IP67 Connector Kit (MIC-IP67-5PK), which is also required when using non-Bosch mounts |
External Mechanical Impact (IK Code or Impact rating) | IEC 62262 IK10 (excluding glass window) |
Operating temperature | -40 °C to +65 °C (-40 °F to +149 °F) |
NEMA TS 2-2003 (R2008), para 2.1.5.1 using fig. 2.1 test profile | -34 ºC to +74 ºC (-30 ºF to +165 ºF) |
Cold Start-up Temperature | -40 °C (-40 °F)(Requires 60-minute warm-up prior to PTZ operations.) |
Storage Temperature | -60 °C to +70 °C (-76 °F to +158 °F) |
Humidity | 0-100% |
Wind Load | 241 km/h (150 mph) (sustained)(Gusts up to 290 km/h (180 mph)) MIC camera w/ IlluminatorCoefficient of Drag: 1.370Effective Projected Area (EPA): 0.089 m² (0.96 ft²) |
Vibration | IEC 60068-2-6, Test Fc: Vibration (sinusoidal), 10m/s² (1.0G)NEMA TS2 Section 2.2.8 Vibration: 5-30 Hz, (0.5G)Sinusoidal vibration test IAW MIL-STD-167-1A |
Shock | IEC 60068-2-27, Test Ea: Shock, Half Sine Impulse, 6ms, 40GNEMA TS 2 Section 2.2.9 Shock (Impact)Test Half sine wave 11 ms, 10G |
Salt Mist Spray (Corrosion Test) | ASTM B117 (2000 hours) |
Dimensions(W x H x D) | Without illuminator accessory or sunshield: Upright, Inverted:217.75 mm x 368.89 mm x 178.33 mm(8.57 in. x 14.52 in. x 7.02 in.) Canted:217.75 mm x 330.96 mm x 239.68 mm(8.57 in. x 13.03 in. x 9.44 in.) Without illuminator accessory, but with sunshield: Upright, Inverted: 217.75 mm x 372.20 mm x 178.33 mm(8.57 in. x 14.65 in. x 7.02 in.) Canted: 217.75 mm x 334.27 mm x 239.68 mm(8.57 in. x 13.16 in. x 9.44 in.) With illuminator accessory: Upright, Inverted: 217.75 mm x 439.91 mm x 178.33 mm(8.57 in. x 17.32 in. x 7.02 in.) Canted: 217.75 mm x 401.98 mm x 239.68 mm(8.57 in. x 15.83 in. x 9.44 in.) |
Weight | 6.7 kg (14.7 lb) 7.9 kg (17.4 lb) with attached illuminator |
Window | Tempered flat glass |
Construction Material | Cast solid aluminum |
Window Wiper | Integrated, long-life silicone wiper |
Sunshield(to prevent sun load in hot climates) | Optional; sold separately |
Canting | On-site canting functionality |
Standard Colors | Black (RAL 9005), White (RAL 9010), or Grey (RAL 7001, available in specific regions only) |
Standard Finish | Chromate-based surface treatment with powder coat paint, sand finish |
MIC-7502-Z30 Ordering Codes
MIC-7502-Z30B | PTZ camera 2MP HDR 30x IP68 black Ruggedized 1080p50/60 HD PTZ day/night camera with 30x zoom, starlight imaging; PoE; IVA. Easy install with hinged DCA mount (sold separately). Optional illuminator (sold separately). Black (RAL 9005). Sand finish. |
MIC-7502-Z30W | PTZ camera 2MP HDR 30x IP68 white Ruggedized 1080p50/60 HD PTZ day/night camera with 30x zoom, starlight imaging; PoE; IVA. Easy install with hinged DCA mount (sold separately). Optional illuminator (sold separately). White (RAL 9010). Sand finish. |
MIC-7502-Z30G | PTZ camera 2MP HDR 30x IP68 gray Ruggedized 1080p50/60 HD PTZ day/night camera with 30x zoom, starlight imaging; PoE; IVA. Easy install with hinged DCA mount (sold separately). Optional illuminator (sold separately). Grey (RAL 7001) color. Available in specific regions only. |
MIC-7502-Z30 Downloads