Details
Bosch FLEXIDOME IP corner 9000 MP Camera
NCN-90022-F1 Key Features
• Corner-mount, no-grip design for maximum safety
• 1.5 MP resolution for sharp images
• Views an entire small room, including directly beneath
• 940 nm illuminator for covert night vision to 9 m (30 ft)
• IP65 water resistance
NCN-90022-F1 Description
The FLEXIDOME corner 9000 MP is a vandal-resistant, corner-mount camera
featuring a no-grip, anchor-free design. The high resolution 1440 x 1080p images
and the integrated infrared illumination allow 24/7 effective professional
networked surveillance in high risk, vandal-prone applications under any ambient
lighting conditions, even completely dark rooms. The ultra-wide lens enables the
camera to view the entirety of a small room, including the floor beneath the
camera. The camera is impossible to grip or hang from, providing maximum safety
for applications such as waiting rooms, elevators and psychiatric care rooms.
NCN-90022-F1 System overview
Corner-mount, vandal-resistant design
The innovative design allows a perfectly flush fit into the corner of a room
that protects against even the most brutal attempt to destroy, detach or disable
the camera. The sharp 45º angle hides all wiring and delivers complete coverage
of a 4.5 x 4.5 m (15 x 15 ft) room, including below the camera itself. The
camera has no anchor points for maximum safety in environments with at-risk
individuals.
Infrared illumination
The camera harnesses the power of infrared illumination to deliver outstanding
images day or night. Infrared-emitting LEDs achieve covert, effective night
vision for the most advanced level of night vision performance available today.
With the intensity adjustable infrared LEDs, foreground hotspots and underexposed
backgrounds are eliminated.
True day/night switching
The camera incorporates mechanical filter technology for vivid daytime colour and
exceptional night-time imaging under infrared illumination while maintaining
sharp focus under all lighting conditions. The camera also features outstanding
spectral response in the near infrared field for excellent active-infrared night
vision.
Intelligent Dynamic Noise Reduction reduces bandwidth and storage requirements
The camera uses Intelligent Dynamic Noise Reduction which actively analyzes the
contents of a scene and reduces noise artefacts accordingly.
The low-noise image and the efficient H.264 compression technology provide clear
images while reducing bandwidth and storage by up to 50% compared to other H.264
cameras. This results in reduced-bandwidth streams that still retain a high
image quality and smooth motion. The camera provides the most usable image
possible by cleverly optimizing the detail-to-bandwidth ratio.
Area-based encoding is another feature which reduces bandwidth. Compression
parameters for up to eight user-definable regions can be set. This allows
uninteresting regions to be highly compressed, leaving more bandwidth for
important parts of the scene. The average typical optimized bandwidth (for
firmware 5.8) in bits/s for various image rates is shown in the table:
IPS | 1080p | VGA |
30 | 1200 | 600 |
15 | 955 | 478 |
7.5 | 711 | 355 |
5 | 568 | 284 |
3 | 388 | 194 |
1440 x 1080p resolution with multiple streams
The camera has a 1440 x 1080p resolution at 30 images per second (ips). The
innovative multistreaming feature delivers various H.264 streams together with
an M‑JPEG stream. These streams facilitate bandwidth-efficient viewing and
recording as well as integration with third-party video management systems.
Regions of interest and e-PTZ
Two Regions of Interest (ROI) can be user defined. The remote electronic pan,
tilt and zoom (e-PTZ) controls allow you to select specific areas of the parent
image. These regions produce separate streams for remote viewing and recording.
These streams, together with the main stream, allow the operator to separately
monitor the most interesting part of a scene while still retaining situational
awareness.
Easy installation
No focus or pan/tilt adjustments are required as the camera, with its wide angle
lens, provides complete coverage of a 4.5 x 4.5 m (15 x 15 ft) room. Power for
the camera can be supplied via a Powerover-Ethernet (IEEE 802.3af) compliant
network cable connection. With this configuration, only a single cable
connection is required to view, power, and control the camera. Using PoE makes
installation easier and more cost-effective, as cameras do not require a local
power source.
The camera can also be supplied with power from +12 VDC or 24 VAC power
supplies. To increase system reliability, the camera can be simultaneously
connected to both PoE and +12 VDC/24 VAC supplies. Additionally, uninterruptible
power supplies (UPS) can be used, which will allow continuous operation, even
during a power failure. For trouble free network cabling, the cameras support
Auto-MDIX.
Two-way audio and audio alarm
Two-way audio allows the operator to communicate via an external audio line
input and output. Audio detection can be used to generate an alarm if needed.
Tamper and motion detection
A wide range of configuration options is available for alarms signalling camera
tampering. A built-in algorithm for detecting movement in the video can also be
used for alarm signalling.
Edge recording
The internal MicroSD card slot supports up to 2 TB (SDXC) of storage capacity. A
microSD card can be used for local alarm recording. Pre-alarm recording in RAM
reduces recording bandwidth on the network, or — if microSD card recording is
used — extends the effective life of the storage medium.
Cloud-based facilities
The camera supports time-based or alarm-based JPEG posting to four different
accounts. These accounts can address FTP servers or cloud-based storage
facilities (for example, dropbox). Video clips or JPEG images can also be
exported to these accounts.
Alarms can be set up to trigger an e-mail or SMS notification so you are always
aware of abnormal events.
Access Security
Password protection with three levels and 802.1x authentication is supported. To
secure Web browser access, use HTTPS with a SSL certificate stored in the
camera. The video and audio communication channels can be independently AES
encrypted with 128-bit keys by installing the optional encryption site license
Complete viewing software
There are many ways to access the camera’s video features: using a web browser,
with the supplied Bosch Video Client, or with the iPad App. The Bosch Video
Client PC surveillance software offers a user-friendly interface to support easy
installation and configuration, and is supplied completely free-of charge. It
provides easy live viewing of multiple cameras, playback, forensic search and
export.
Video security App
The Bosch Video Security iPad App has been developed to fully utilize our
Dynamic Transcoding features and enable Anywhere access to HD surveillance
images, even over low-bandwidth connections. The App, together with the
separately available Bosch transcoder, is configured to give you complete
control of your camera.
System integration
Bosch IP standard definition and high definition cameras, encoders and analytics
work seamlessly with a wide range of security software and recording solutions
from Bosch and other industry providers. Through ONVIF conformance, the open
availability of Bosch video software development kits and a team dedicated to
special integration and support projects, it is easy to manage Bosch video
products within your system design.
Applications
• Waiting rooms
• Hospital recovery rooms
• Psychiatric care rooms
• Vandal-prone areas