Details
Bosch TINYON IP 2000 WI
NPC-20012 Series Key Features
• Compact and stylish 720p indoor wireless LAN camera
• IEEE 802.11b/g/n wireless connectivity
• WPS for easy wireless network setup
• Built-in PIR motion detector and white light illuminator
• FTP, Dropbox and e-mail alarms
NPC-20012 Series Description
The 720p indoor microbox cameras with WiFi and a passive infrared (PIR) motion
detector are ready-to use, complete network video surveillance systems inside a
compact and stylish housing. These cameras bring Bosch’s high-performance
technology into the realm of homes, small office and retail businesses by
offering a cost-effective solution for a broad range of applications.
NPC-20012 Series System overview
Ideal for indoor use, the compact, aesthetic design is suitable for
installations where housing size and appearance are important. The camera is
available in two colours and is supplied with a versatile mounting bracket,
allowing it to be easily positioned for best coverage.
The wireless connectivity, with no external antenna, further enhances the
aesthetic nature of the installation and also removes the need for a network
cable.
NPC-20012 Series Functions
Integrated wireless connection
The integrated wireless LAN feature supports the IEEE 802.11b, g and n standards
allowing the camera to connect to fast WiFi access points. The WPS button
provides an easy and simple way to set up the wireless LAN connection and
security settings.
Motion and audio detection
The built-in passive infrared (PIR) sensor detects motion within 5 meters, even
in complete darkness. can then trigger an alarm, start recording or switch on
the integrated white light LED to provide illumination in darkened rooms. These
functions can also be activated by the detection of sound by the built-in
microphone.
Built-in microphone and loudspeaker
The built-in microphone and loudspeaker allows remote users to listen in on an
area and communicate messages to visitors or intruders via the loudspeaker.
Audio detection can be used to generate an alarm if needed.
Intelligent Dynamic Noise Reduction
Quiet scenes with little or no movement require a lower bitrate. By
intelligently distinguishing between noise and relevant information, Intelligent
Dynamic Noise Reduction reduces bitrate by up to 50%. Because noise is reduced
at the source during image capture, the lower bitrate does not compromise on
video quality.
With Intelligent Dynamic Noise Reduction, our focus is to significantly reduce
storage costs, and lessen network strain by only using bandwidth when needed.
Area-based encoding
Area-based encoding is another feature which reduces bandwidth. Compression
parameters for up to eight user-definable regions can be set. This allows
uninteresting regions to be highly compressed, leaving more bandwidth for
important parts of the scene.
Bitrate optimized profile
The average typical optimized bandwidth in kbits/s for various image rates is
shown in the table:
fps | 720p | 480p |
30 | 1200 | 600 |
15 | 955 | 478 |
12 | 877 | 438 |
5 | 568 | 284 |
2 | 245 | 122 |
Multiple streams
The innovative multi-streaming feature delivers various H.264 streams together
with an M‑JPEG stream. These streams facilitate bandwidth-efficient viewing and
recording as well as integration with third-party video management systems.
Depending on the resolution and frame rate selected for the first stream, the
second stream provides a copy of the first stream or a lower resolution stream.
The third stream uses the I-frames of the first stream for recording; the fourth
stream shows a JPEG image at a maximum of 10 Mbit/s.
Easy installation
The power supply adapter delivered with the camera provides the +5 VDC power
supply required. The wireless connectivity removes the need for a network cable,
however, an Ethernet compliant network cable can be connected if required. The
WPS button simplifies the selection of a WiFi network and the network password
setting.
Tamper and motion detection
A wide range of configuration options is available for alarms signalling camera
tampering. A built-in algorithm for detecting movement in the video can also be
used for alarm signalling.
Cloud-based services
The camera supports time-based or alarm-based JPEG posting to four different
accounts. These accounts can address FTP servers or cloud-based storage
facilities (for example, Dropbox). Video clips or JPEG images can also be
exported to these accounts.
Alarms can be set up to trigger an e-mail or SMS notification so you are always
aware of abnormal events.
Access Security
Password protection with three levels and 802.1x authentication is supported. To
secure Web browser access, use HTTPS with a SSL certificate stored in the
camera.
Complete viewing software
There are many ways to access the camera’s features: using a web browser, with
the Bosch Video Management System, with the free-of-charge Bosch Video Client,
with the video security mobile app, or via third-party software.
Video security App
The Bosch video security mobile App has been developed to enable Anywhere access
to HD surveillance images allowing you to view live images from any location.
The App is designed to give you complete control of all your cameras, from
panning and tilting to zoom and focus functions. It’s like taking your control
room with you.
This App, together with the separately available Bosch transcoder, will allow
you to fully utilize our dynamic transcoding features so you can play back
images even over low-bandwidth connections.
System integration
The camera conforms to the ONVIF Profile S specification. Compliance with this
standard guarantees interoperability between network video products regardless
of manufacturer.
Third-party integrators can easily access the internal feature set of the camera
for integration into large projects.
NPC-20012 Series Specification
Power | |
Power Supply | +5 VDC via supplied power adapter |
Power Consumption | 4.4 W typical |
Power adapter | 100-240 VAC to +5 VDC power supply included |
Sensor | |
Type | 1/4‑inch CMOS |
Total sensor pixels | 1280 x 800 (1MP) |
Video performance – Sensitivity(3200K, 89% reflectivity, 30IRE, F2.8) | |
Sensitivity | 1.0 lx 0.0 lx (with LED) |
Video performance ‑ Dynamic range | |
Dynamic range | 76 dB WDR |
Video streaming | |
Video compression | H.264 (MP); M- JPEG |
Streaming | Multiple configurable streams in H.264 and M-JPEG, configurable frame rate and bandwidth. |
Overall IP Delay | Min. 120 ms, Max. 340 ms |
GOP structure | IP, IBP, IBBP |
Encoding interval | 1 to 30 ips |
Video resolution (H x V) | |
720p HD | 1280 x 720 (at 30 ips) |
Upright 9:16 (cropped) | 400 x 720 |
D1 4:3 (downscaled/cropped) | 704 x 480 |
480p SD | Encoding: 704 x 480; Displayed: 854 x 480 |
432p SD | 768 x 432 |
288p SD | 512 x 288 |
240p SD | Encoding: 352 x 240; Displayed: 432 x 240 |
144p SD | 256 x 144 |
Video functions | |
Adjustable picture settings | Contrast, Saturation, Brightness |
White Balance | Standard automatic mode, manual mode and hold |
Shutter | Automatic Electronic Shutter (1/30 to 1/150000) Fixed shutter (1/30 to 1/15000) selectable |
Backlight compensation | On/off |
Noise reduction | Intelligent Dynamic Noise Reduction |
Privacy Masking | Four independent areas, fully programmable |
Video Analysis | MOTION+ |
Other functions | Image mirror, Image flip, Pixel counter, Video watermarking, Display stamping, Motion detection, Tamper alarm, Audio alarm |
Audio streaming | |
Standard | G.711, 8 kHz sampling rate L16, 16 kHz sampling rate AAC-LC, 48 kbps at 16 kHz sampling rate AAC-LC, 80 kbps at 16 kHz sampling rate |
Signal-to-Noise Ratio | >50 dB |
Audio Streaming | Full-duplex / half duplex |
Input/output | |
Audio input | Built-in microphone |
Audio output | Built-in loudspeaker |
Alarm input | 1 input |
Alarm activation voltage | 0 to 3.3 VDC active low, or short |
Alarm output | 1 output |
Alarm output voltage | +5 VDC Load current 1 A max. |
Detection | |
Detector | PIR (passive infrared) |
Distance | 5 m (16 ft) |
Detection angle | 90° (H) |
Night vision | |
Distance | 4 m (13 ft) |
Illumination | White light LED |
Optical | |
Lens type | Fixed 2.5 mm, F2.8 |
Lens mount | Board mounted |
Horizontal field of view | 89° |
Vertical field of view | 50° |
Software | |
Unit Configuration | Via web browser or Configuration Manager |
Firmware update | Remotely programmable |
Software viewer | Web browser, Bosch Video Client, or third party software |
Wireless LAN | |
Wireless standard | IEEE 802.11b/g/n |
Wireless security | WPA-PSK (TKIP), WPA2-PSK (AES) |
WiFi protected setup | WPS button, PIN |
Network | |
Protocols | IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, APIPA (Auto-IP, link local address), NTP (SNTP), SNMP (V1, MIB-II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication |
Encryption | TLS 1.0, SSL, DES, 3DES |
Ethernet | 10/100 Base-T, auto-sensing, half/full duplex |
Connectivity | ONVIF Profile S , Auto-MDIX |
Mechanical | |
Dimensions (H x W x D) | 109 x 65 x 47 mm (4.29 x 2.56 x 1.85 in) |
Weight | 105 g (3.70 oz) |
Environmental | |
Operating Temperature | -10 ºC to +40 ºC (14 ºF to +104 ºF) |
Storage Temperature | -20 ºC to +70 ºC (-4 ºF to +158 ºF) |
Humidity | 0% to 95% relative humidity (non condensing) |
NPC-20012 Series Ordering Information
Product Code | Description |
NPC-20012-F2WL | TINYON IP 2000 WI Cost-effective, ready-to-use, wireless LAN microbox camera with PIR for indoor surveillance. 720p30; 2.5 mm lens; +5 VDC PSU; motion/audio detection; cloud services; free viewing Apps; IDNR; PIR; wireless LAN; black |
NPC-20012-F2WL-W | TINYON IP 2000 WI Cost-effective, ready-to-use, wireless LAN microbox camera with PIR for indoor surveillance. 720p30; 2.5 mm lens; +5 VDC PSU; motion/audio detection; cloud services; free viewing Apps; IDNR; PIR; wireless LAN; white |