Details
Bosch Midspan PoE Injector
NPD-5004-POE Key Features
• Makes PoE cameras easy to install
• Allows one-wire connection
• Reduces power supply requirements
• Compact and cost effective solution
• Supplies up to 15.4 W per port
NPD-5004-POE Description
This power injector allows an existing Ethernet infrastructure to be enhanced
for use with PoE cameras.
System overview
The NPD-5004‑POE four-port power injector can supply four individual PoE cameras
with power.
Functions
The injector converts the AC input power to a +48 VDC power supply which is then
provided to the cameras via the Ethernet cable. They support up to 10/100/1000
Mbps pass-through data rates. Each injector provides up to 15.4 W per port. The
PoE midspan injector unit can be easily mounted on a shelf, wall or ceiling
NPD-5004-POE Specifications
Power | |
Input supply voltage | 100 to 240 VAC; 50/60 Hz |
Maximum input current | 1 A @ 110 VAC; 0.4 A @ 240 VAC |
Output supply voltage | + 48 VDC nominal |
Output port power | 15.4 W max. |
Input/output | |
Power input connector | IEC 60320 |
Ethernet connection | Shielded RJ45 connector; EIA 568A and 568B |
Data | 10/100/1000 Mbps pass-through data rates |
Mechanical | |
Dimensions (W x H x L) | 148 x 43 x 224 mm (5.82 x 1.69 x 8.82 in) |
Weight | 620 g (1.4 lb) |
Environmental | |
Operating Temperature | 0°C to +40°C (32°F to 104°F) |
Storage Temperature | -20°C to +70°C (-4°F to 158°F) |
Operating Humidity | 90% RH max. non-condensing |
Storage Humidity | 95% RH max. non-condensing |
Thermal rating | 51 BTU/hour |