Details
Bosch FLEXIDOME IP micro 5000 Camera
FlexiDome 5000 Series Key Features
- Compact and stylish outdoor microdome
- 1080p and 5MP resolutions
- Regions of interest and E-PTZ
- Motion and tamper detection
- FTP, Dropbox and e-mail alarms
FlexiDome 5000 Series Description
The HD 1080p and 5MP vandal-resistant microdome cameras from Bosch are
professional surveillance cameras that provide high quality HD and MP images for
demanding security and surveillance network requirements. The camera comes with
a choice of lenses including an ultra-wide angle lens which provides outstanding
performance without the need for de-warping software.
The cameras are available in 1080p and 5MP versions and there is a special
version designed for Interior Vehicle Mounting (IVM) using an M12 connector.
FlexiDome 5000 Series System overview
Compact and stylish, vandal-resistant design Ideal for indoor or outdoor use,
the compact aesthetic design is suitable for installations where housing size
and appearance are important. The cast-aluminium housing, polycarbonate window,
and hardened inner liner can withstand the equivalent of 55 kg (120 lbs) of
force (IK08). The camera is protected against water and dust to IP66 standards.
Mounting options are numerous, including surface, wall, and suspended ceiling
mounting.
FlexiDome 5000 Series Functions
Intelligent Dynamic Noise Reduction reduces bandwidth and storage requirements
The camera uses Intelligent Dynamic Noise Reduction which actively analyzes the
contents of a scene and reduces noise artefacts accordingly. The low-noise image
and the efficient H.264 compression technology provide clear images while
reducing bandwidth and storage by up to 50% compared to other H.264 cameras.
This results in reduced-bandwidth streams that still retain a high image quality
and smooth motion. The camera provides the most usable image possible by
cleverly optimizing the detail-to-bandwidth ratio.
Area-based encoding
Area-based encoding is another feature which reduces bandwidth. Compression
parameters for up to eight user-definable regions can be set. This allows
uninteresting regions to be highly compressed, leaving more bandwidth for
important parts of the scene. The average typical optimized bandwidth in kbits/s
for various image rates is shown in the table:
IPS | 5MP | 1080p | 720p | 480p |
30 | - | 1600 | 1200 | 600 |
15 | - | 1274 | 955 | 478 |
12 | 1753 | 1169 | 877 | 438 |
5 | 1136 | 757 | 568 | 284 |
2 | 489 | 326 | 245 | 122 |
1080p or 5MP resolutions with multiple streams
The camera is available in a 1080p resolution version at 30 images per second
(ips) or a 5MP resolution version at 12 ips. The innovative multi-streaming
feature delivers various H.264 streams together with an M‑JPEG stream. These
streams facilitate bandwidth-efficient viewing and recording as well as
integration with third-party video management systems.
Regions of interest and E-PTZ
Regions of Interest (ROI) can be user defined. The remote E-PTZ (Electronic Pan,
Tilt and Zoom) controls allow you to select specific areas of the parent image.
These regions produce separate streams for remote viewing and recording. These
streams, together with the main stream, allow the operator to separately monitor
the most interesting part of a scene while still retaining situational
awareness.
Edge recording
The MicroSD card slot supports up to 2 TB of storage capacity. A microSD card
can be used for local alarm recording. Pre-alarm recording in RAM reduces
recording bandwidth on the network, or — if microSD card recording is used —
extends the effective life of the storage medium.
Tamper and motion detection
A wide range of configuration options is available for alarms signalling camera
tampering. A built-in algorithm for detecting movement in the video can also be
used for alarm signalling.
Cloud-based services
The camera supports time-based or alarm-based JPEG posting to four different
accounts. These accounts can address FTP servers or cloud-based storage
facilities (for example, Dropbox). Video clips or JPEG images can also be
exported to these accounts. Alarms can be set up to trigger an e-mail or SMS
notification so you are always aware of abnormal events.
Easy installation
Power for the camera can be supplied via a Powerover-Ethernet compliant network
cable connection. With this configuration, only a single cable connection is
required to view, power, and control the camera. Using PoE makes installation
easier and more cost effective, as cameras do not require a local power source.
The camera can also be supplied with power from +12 VDC/24 VAC power supplies.
To increase system reliability, the camera can be simultaneously connected to
both PoE and +12 VDC/24 VAC supplies. Additionally, uninterruptible power
supplies (UPS) can be used, which will allow continuous operation, even during a
power failure.
3-axis adjustment
The 3-axis adjustment allows easy installation on a wall or a ceiling with a
precise field of view.
Access Security
Password protection with three levels and 802.1x authentication is supported. To
secure Web browser access, use HTTPS with a SSL certificate stored in the
camera.
Complete viewing software
There are many ways to access the camera's features:
using a web browser, with the Bosch Video Management System, with the
free-of-charge Bosch Video Client, with the video security mobile app, or via
third-party software.
Video security App
The Bosch video security mobile App has been developed to enable Anywhere access
to HD surveillance images allowing you to view live images from any location.
The App is designed to give you complete control of all your cameras, from
panning and tilting to zoom and focus functions. It’s like taking your control
room with you.
This App, together with the separately available Bosch transcoder, will allow
you to fully utilize our dynamic transcoding features so you can play back
images even over low-bandwidth connections.
System integration
The camera conforms to the ONVIF Profile S specification. This guarantees
interoperability between network video products regardless of manufacturer.
Third-party integrators can easily access the internal feature set of the camera
for integration into large projects.
FlexiDome 5000 Series Certifications and approvals
HD standards
Complies with the SMPTE 274M-2008 Standard in:
– Resolution: 1920x1080
– Scan: Progressive
– Colour representation: complies with ITU-R BT.709
– Aspect ratio: 16:9
– Frame rate: 25 and 30 frames/s
Complies with the 296M-2001 Standard in:
– Resolution: 1280x720
– Scan: Progressive
– Colour representation: complies with ITU-R BT.709
– Aspect ratio: 16:9
– Frame rate: 25 and 30 frames/s
FlexiDome 5000 Series Ordering information
Product Code | Description |
NUC-51022-F4 | FLEXIDOME IP micro 5000 HD Compact and stylish outdoor HD microdome camera. IP66; IDNR; ROI; day/night; tamper/motion detection; 3-axis adjustment; cloud services; free viewing Apps; fixed 3.6 mm lens; 1080p |
NUC-51051-F4 | FLEXIDOME IP micro 5000 MP Compact and stylish outdoor MP microdome camera. IP66; IDNR; ROI; day/night; tamper/motion detection; 3-axis adjustment; cloud services; free viewing Apps; fixed 3.6 mm lens; 5MP |
NUC-51022-F2 | FLEXIDOME IP micro 5000 HD Compact and stylish outdoor microdome camera. IP66; IDNR; ROI; day/night; tamper/motion detection; 3-axis adjustment; cloud services; free viewing Apps; fixed 2.5 mm f2.8 lens; 1080p |
NUC-51051-F2 | FLEXIDOME IP micro 5000 MP Compact and stylish outdoor MP microdome camera. IP66; IDNR; ROI; day/night; tamper/motion detection; 3-axis adjustment; cloud services; free viewing Apps; fixed 2.5 mm f2.8 lens; 5MP |
NUC-51022-F2M | FLEXIDOME IP micro 5000 HD Compact and stylish outdoor microdome camera. IP66; IDNR; ROI; day/night; tamper/motion detection; 3-axis adjustment; cloud services I; free viewing Apps; fixed 2.5 mm f2.8 lens; 1080p; IVM (M12) |
NUC-51051-F2M | FLEXIDOME IP micro 5000 MP Compact and stylish outdoor MP microdome camera. IP66; IDNR; ROI; day/night; tamper/motion detection; 3-axis adjustment; cloud services; free viewing Apps; fixed 2.5 mm f2.8 lens; 5MP; IVM (M12) |