Details
Bosch Indoor Camera Housing
UHI-OG-0 Key Features
- Protects camera/lens combinations up to 317 mm (12.48 in) length
- Sunshield
- Hinged side opening for easy installation and camera setup
- Strong aluminium construction
- Cable routing through base or rear of housing
- Tamper-resistant
UHI-OG-0 Description
The Indoor Camera Housing is a smartly styled unit, intended for use inside.
This housing is both cost competitive and installer-friendly.
UHI-OG-0 Functions
Easy installation
The unique, hinged, side-opening design provides easy installation of all
camera/lens combinations, and allows access to most camera and lens controls
when the housing is mounted. Route power, video, and lens control cabling
through the liquid-tight fittings in the bottom rear of the housing, or for even
better cable management, via the feed-through entry holes in the base. Mounting
holes in the base permit installation to a wide range of pan/tilts, adjustable
heads, and various camera-mounting brackets.
Dinion ready
This housing supports installation of Dinion style cameras with fixed focal,
varifocal, or up to a 15x motorized zoom lens.
Secure
For increased security, the units come with tamper resistant screws for the
locking clasps to prevent illegitimate access to the housing contents. The
housing is an optimal solution for protecting your indoor video surveillance
applications.
UHI-OG-0 Specification
Rear fitting | 1 x, cable diameter 4.0 to 7.0 mm (0.16 to 0.28 in) |
Rear fittings | 2 x, cable diameter 6.5 to 10.5 mm (0.26 to 0.42 in) |
Bottom feeds | 2 x, cable diameter 4.0 to 7.0 mm (0.16 to 0.28 in) |
Window | 3 mm (0.12 in) glass |
Locking clasps | Tamper-resistant screws provided |
Camera power ratings | 24/120/230 VAC, 50/60 Hz, 6.3 A |
Camera mounting | Removable camera/lens tray, mounted with two screws |
Max camera + lens size (H x W x L) | 81 x 89 x 317 mm (3.19 x 3.50 x 12.48 in) |
Construction | Aluminum casing, neoprene gaskets, all stainless steel hardware |
Dimensions | See drawings |
Weight | 2.3 kg (5.1 lb) |
Mounting | 2 x pair of tapped holes |
thread | 1/4-20 |
inner pair | 50.8 mm (2.0 in) center spread |
outer pair | 73.7 mm (2.9 in) center spread |
Color | Gray |
Operating temperature | -40 °C to +50 °C (-40 °F to +122 °F) |
Enclosure protection | IP66, NEMA-4X |