Details
Bosch FLEXIDOME AN corner 9000 Camera
VCN-9095 Series Key Features
• Corner-mount, no-grip design for maximum safety
• Ultra high resolution 960H sensor
• Views an entire small room, including directly beneath
• 940 nm illuminator for covert night vision to 9 m (30 ft)
• IP65 water resistance
VCN-9095 Series description
The FLEXIDOME corner 9000 IR is a vandal-resistant, corner-mount camera
featuring a no-grip, anchor-free design. This water-resistant dome camera uses a
high performance 960H 1/3-inch CCD sensor with a resolution of 720TVL. The
sensor, the integrated infrared illumination, and the advanced image processing
technology combine to allow 24/7 effective professional surveillance in high
risk, vandal-prone applications under any ambient lighting conditions, even
completely dark rooms.
The ultra-wide lens enables the camera to view the entirety of a small room,
including the floor beneath the camera. The camera is impossible to grip or hang
from, providing maximum safety for applications such as waiting rooms, elevators
and psychiatric care rooms.
VCN-9095 Series System overview
Corner-mount, vandal-resistant design
The innovative design allows a perfectly flush fit into the corner of a room
that protects against even the most brutal attempt to destroy, detach or disable
the camera. The sharp 45º angle hides all wiring and delivers complete coverage
of a 4.5 x 4.5 m (15 x 15 ft) room, including below the camera itself. The
camera has no anchor points for maximum safety in environments with at-risk
individuals.
Infrared illumination
The camera harnesses the power of infrared illumination to deliver outstanding
images day or night. Infrared-emitting LEDs achieve covert, effective night
vision for the most advanced level of night vision performance available today.
With the intensity adjustable infrared LEDs, foreground hotspots and
underexposed backgrounds are eliminated.
True day/night switching
The camera incorporates mechanical filter technology for vivid daytime colour
and exceptional night-time imaging under infrared illumination while maintaining
sharp focus under all lighting conditions. The camera also features outstanding
spectral response in the near infrared field for excellent active-infrared night
vision.
Ease of installation
No focus or pan/tilt adjustments are required as the camera, with its wide angle
lens, provides complete coverage of a 4.5 x 4.5 m (15 x 15 ft) room. The camera
can be supplied with power from either +12 VDC or 24 VAC power supplies.
Six independent, pre-programmed operating modes support typical applications,
but are fully programmable for individual situations. Switching between modes is
easy via Bilinx or the external alarm input.
Several other features are available that make installation easy:
• | Video BNC and power connectors on flying leads. |
• | A built-in test pattern generator produces signals to test and fault-find cables. |
• | A built-in OSD control panel allows on-site adjustment of camera settings. |
• | A multi-language On-Screen Display (OSD). |
Bilinx technology
Bilinx is a bidirectional communication capability embedded in the video signal
of this camera. Installers can check status, change camera settings and even
update firmware from virtually anywhere along the video cable. Bilinx reduces
service and installation time, provides for more accurate set-up and adjustment,
and improves overall performance. In addition, Bilinx uses the standard video
cable to transmit alarm and status messages, providing superior performance
without additional installation steps.
Ideal picture performance
There are many settings available to help fine-tune the picture performance to
match your installation environment. These include:
• | Smart BLC – automatically and dynamically compensates for strong backlight |
• | Peak White Invert – reduces glare from highlight areas |
• | Contrast and sharpness – enhance details in bright or misty scenes |
• | SensUp – sensitivity is dramatically enhanced by a factor of 10 |
• | Default shutter – improves the motion performance in auto exposure mode |
• | Dynamic noise reduction – dynamically reduces noise in the picture |
Privacy masking
Fifteen different privacy zones allow specific parts of a scene to be blocked.
Pre-program any part of the scene to be masked.
Video Motion Detection
The built-in video motion detector allows you to select four programmable areas
with sensitivity thresholds. When motion is detected, alarms can be displayed in
the video signal, the output relay can be closed or an alarm message can be
transmitted via Bilinx.
Typical applications
• Waiting rooms
• Hospital recovery rooms
• Psychiatric care rooms
• Vandal-prone areas
VCN-9095 Series Specification
Input voltage | +12 VDC or 24 VAC |
Power consumption | 6.48 W max. (12 VDC) 12.24 VA max. (+24 VAC) |
Image Sensor | 960H, 1/3" CCD, sensor resolution 720TVL, WDR dual shutter |
System | PAL or NTSC |
Total pixels (H x V) | 1028 x 596 (PAL) 1028 x 508 (NTSC) |
Effective pixels (H x V) | 976 x 582 (PAL) 976 x 494 (NTSC) |
Sensitivity (3200K, scene reflectivity 89%, F1.2)” | |
Full video (100 IRE) | Usable picture (50 IRE) , Usable picture (30 IRE) |
Color | 0.5 lx (0.0465 fc) , 0.09 lx (0.0837 fc) , 0.04 lx (0.00372 fc) |
Color+ SensUp 10x | 0.05 lx (0.00465 fc) , 0.009 lx (0.000837 fc) , 0.004 lx (0.000372 fc) |
Monochrome | 0.2 lx (0.0186 fc) , 0.04 lx (0.00372 fc) , 0.02 lx (0.00186 fc) |
Monochrome SensUp 10x | 0.02 lx (0.00186 fc) , 0.004 lx (0.000372 fc) , 0.002 lx (0.000186 fc) |
Monochrome + IR on | 0.0 lx , 0.0 lx , 0.0 lx |
Signal-to-Noise Ratio | >50 dB |
Video Output | Composite video 1 Vpp, 75 ohm |
Synchronization | Internal, Line Lock |
Shutter | Auto (1/50 [1/60] to 1/100000) selectable, fixed, flickerless, default |
Sensitivity Up | Adjustable from Off up to 10x |
True Day/Night | Color, Mono, Auto |
Dynamic Engine | XF-Dynamic, HDR, Smart BLC |
Dynamic Range | 94 dB (WDR) |
Dynamic Noise Reduction | 2D-NR, 3D-NR |
AGC | AGC On or Off (0 – 40 dB) selectable |
Smart BLC | On/Off |
Peak White Invert | On/Off |
White Balance | ATW Indoor, ATW Outdoor, ATW hold and Manual |
Contrast Enhancement | Low, Medium, High |
Sharpness | Sharpness enhancement level selectable |
Camera ID | 17 character editable string, position selectable |
Test Pattern Generator | Color bar, Raster, Impulse, Cross Impulse, Cross hatch, |
Modes | 6 preset programmable modes |
Remote Control | Bilinx coaxial bi-directional communication |
Video Motion Detection | 4 areas, fully programmable |
Privacy Masking | 15 independent areas, fully programmable |
E-Zoom | Up to 16x |
Digital Image Stabilizer | On/Off |
OSD Language | English, French, German, Spanish, Portuguese, Simplified Chinese, Russian |
IR LEDs | 3 high efficiency LEDs, 940 nm |
IR coverage | 9 m (30 ft) |
Lens type | Fixed 2.0 mm, F2.0 |
Lens mount | Board mounted |
Horizontal field of view | 139° |
Vertical field of view | 104° |
Analog video out | BNC connector (1 Vpp 75 Ohm CVBS, PAL/NTSC) |
Alarm input | 0 to 3.3 VDC, low active or high active |
Alarm output | 60 VDC or 60 VAC (max), load current: 1 A (max) |
Dimensions (W x H x D) | 240 x 146 x 169 mm (9.45 x 5.75 x 6.65 in.) |
Weight | 1840 g (4.06 lb) approx. |
Operating temperature | -10 ºC to +50 ºC (14 ºF to +122 ºF) |
Storage temperature | -30 ºC to +60 ºC (-22 ºF to +140 ºF) |
Humidity | 20% to 90% relative humidity (non condensing) |
VCN-9095 Series Ordering information
Product Code | Description |
VCN-9095-F111 | FLEXIDOME AN corner 9000 960H integrated infrared analogue corner-mount camera. No-grip; IP65; IK10; 12VDC/24VAC; true WDR; fixed 2 mm lens; true day/night; 720 TVL; 4-zone motion detect; privacy mask; PAL |
VCN-9095-F121 | FLEXIDOME AN corner 9000 960H integrated infrared analogue corner-mount camera. No-grip; IP65; IK10; 12VDC/24VAC; true WDR; fixed 2 mm lens; true day/night; 720 TVL; 4-zone motion detect; privacy mask; NTSC |