Imager |
1/4 in.-type Exview HAD CCD (progressive scan) |
Effective Picture Elements |
PAL: Approx. 440,000; 752(H) x 582(V) NTSC: Approx. 380,000; 768 (H) x
494 (V) |
Lens |
36x Zoom (3.4–122.4 mm) F1.6 to F4.5 |
Zoom Movement Speed |
NTSC , PAL |
Optical WIDE / Optical TELE – Focus Tracking ON |
4.0 sec. , 4.0 sec. |
Optical WIDE / Optical TELE – Focus Tracking OFF |
2.7 sec. , 2.7 sec. |
Optical WIDE / Digital TELE |
6.0 sec. , 6.2 sec. |
Digital WIDE / Digital TELE |
2.1 sec. , 2.3 sec. |
Focus |
Automatic with manual override |
Iris |
Automatic with manual override |
Field of View |
1.7° to 57.8° |
Video Output |
1.0 Vp-p, 75 Ohm |
Gain Control |
Auto/Manual/Max. (–3 dB to 28 dB, 2 dB steps) |
Aperture Correction |
Horizontal and vertical |
Digital Zoom |
12x |
Horizontal Resolution |
550 TVL (NTSC, PAL) typical |
Synchronization |
Line-Lock (–120° to 120° vertical phase adjust) or internal crystal |
Sensitivity (typical) 1 |
30 IRE , 50 IRE |
Day Mode |
|
SensUp Off |
0.66 lux , 1.4 lux |
SensUp On(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X) |
0.04 lux , 0.1 lux |
Night Mode |
|
SensUp Off |
0.104 lux , 0.209 lux |
SensUp On(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X) |
0.0052 lux , 0.0103 lux |
Electronic Shutter Speed |
1/1 to 1/10,000 sec., 22 steps |
Wide Dynamic Range (WDR) |
92 dB (50 dB with WDR Off) |
Signal-to-Noise Ratio (SNR) |
>50 dB |
White Balance |
2000 K to 10,000 K |
1. Unless otherwise stated, test conditions are: F1.6; shutter = NTSC
1/60s, PAL 1/50s; max AGC; no bubble. Clear bubble adds 0.09 f-stop loss
(90% light transmission). Tinted bubble adds 0.47 f-stop loss (60% light
transmission). |
|
|
|
Imager |
1/4 in.-type Exview HAD CCD (progressive scan) |
Effective Picture Elements |
NTSC: 380,000 PAL: 440,000 |
Lens |
28x Zoom (3.5–98.0 mm) F1.35 to F3.7 |
Zoom Movement Speed |
NTSC , PAL |
Optical WIDE / Optical TELE – Focus Tracking ON |
2.5 sec. , 2.5 sec |
Optical WIDE / Optical TELE – Focus Tracking OFF |
1.7 sec. , 1.7 sec. |
Optical WIDE / Digital TELE – Focus Tracking ON |
4.5 sec. , 4.9 sec. |
Optical WIDE / Digital TELE – Focus Tracking OFF |
1.7 sec. , 1.7 sec. |
Digital WIDE / Digital TELE |
2.0 sec. , 2.5 sec. |
Focus |
Automatic with manual override |
Iris |
Automatic with manual override |
Field of View |
2.1° to 55.8° |
Video Output |
1.0 Vp-p, 75 Ohm |
Gain Control |
Auto/Manual/Max. (–3 dB to 28 dB, 2 dB steps) |
Aperture Correction |
Horizontal and vertical |
Digital Zoom |
12x |
Horizontal Resolution |
550 TVL |
Synchronization |
Line-Lock (–120° to 120° vertical phase adjust) or internal crystal |
Sensitivity (typical) 2 |
30 IRE , 50 IRE |
Day Mode |
|
SensUp Off |
0.33 lux , 0.66 lux |
SensUp On(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X) |
0.02 lux , 0.04 lux |
Night Mode |
|
SensUp Off |
0.066 lux , 0.166 lux |
SensUp On(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X) |
0.0026 lux , 0.0082 lux |
Electronic Shutter Speed |
1/1 to 1/10,000 sec., 22 steps |
Wide Dynamic Range (WDR) |
92 dB (50 dB with WDR Off) |
Signal-to-Noise Ratio (SNR) |
>50 dB |
White Balance |
2000 K to 10,000 K |
2. Unless otherwise stated, test conditions are: F1.6; shutter = NTSC
1/60s, PAL 1/50s; max AGC; no bubble. Clear bubble adds 0.09 f-stop loss
(90% light transmission). Tinted bubble adds 0.47 f-stop loss (60% light
transmission). |
|
|
|
In-Ceiling |
Indoor Pendant , Outdoor Pendant |
Pan Range |
360° cont. , 360° cont. , 360° cont. |
Tilt Angle |
1° above horizon , 18° above horizon , 18° above horizon |
Variable Speed |
0.1°/s-120°/s , 0.1°/s-120°/s , 0.1°/s-120°/s |
Pre-position Speed |
Pan: 360°/s Tilt: 100°/s , Pan: 360°/s Tilt: 100°/s , Pan: 360°/s Tilt:
100°/s |
Preset Accuracy |
± 0.1° typ. , ± 0.1° typ. , ± 0.1° typ. |
|
|
In-Ceiling |
Indoor Pendant , Outdoor Pendant |
Input Voltage |
21-30 VAC 50/60 Hz , 21-30 VAC 50/60 Hz , 21-30 VAC 50/60 Hz |
Power Consumption(typical) |
15 W / 27 VA , 15 W / 27 VA , 51 W / 55 VA3 |
3. Add 16 W if using VG4-SHTR-XT kit. |
|
|
|
Protection on Video |
Peak current 10 kA (Gas Tube Arrester) |
Protection on Biphase |
Peak current 10 A, peak power 300 W (8/20 μs) |
Protection on RS-232/485 |
ESD protection ±15 KV human body model |
Protection on Alarm Inputs |
Peak current 17 A, peak power 300 W (8/20 μs) |
Protection on Alarm Outputs |
Peak current 2 A, peak power 300 W (8/20 μs) |
Protection on Relay Outputs |
Peak current 7.3 A, peak power 600 W (10/1000 μs) |
Protection on Power Input (Dome) |
Peak current 7.3 A, peak power 600 W (10/1000 μs) |
Protection on PowerOutput (Arm Power Supply) |
Peak current 21.4 A, peak power 1500 W(10/1000 μs) |
|
|
VGA-FIBER-AN |
|
Description |
Multimode Fiber Optic Module |
Compatible Receiver |
LTC 4629 Series |
Optical Fiber Compatibility |
50/125 µm, 62.5/125 µm, low loss multimode glass fiber, rated for a
minimum system bandwidth of 20 MHz |
Max. Distance |
4.0 km (2.5 miles) |
Optical Budget |
14 dB |
Connector |
One (1) ST connector |
Wavelength (video/data) |
850 nm / 1310 nm |
|
|
Sectors/Titling |
16 independent sectors with 20-character titles/sector |
Masking |
24 individually configurable privacy masks |
Pre-positions |
99, each with 20-character titles |
Camera Setup/Control |
Biphase, RS-232, RS-485, Bilinx (coax) |
Communications Protocols |
Biphase, Bilinx, Pelco P, and Pelco D |
Guard Tours |
Two (2) types of tours: Recorded tours – two (2), total duration
15 minutes Preset tour – one (1), consisting of up to 99 scenes,
consecutively and (1) customized up to 99 scenes |
Supported Languages |
English, Czech, Dutch, French, German, Italian, Polish, Portuguese,
Russian and Spanish |
Cable Compensation |
|
Max Distance |
With Pre-comp OFF , With Pre-comp ON |
RG-59/U |
1000 ft (300 m) , 2000 ft (600 m) |
RG-6/U |
1500 ft (450 m) , 3000 ft (900 m) |
RG-11/U |
2000 ft (600 m) , 4000 ft (1200 m) |
Cat 5/UTP (Passive receiver) |
750 ft (225 m) , 1500 ft (450 m) |
Power, Camera |
21-30 VAC, 50/60 Hz |
Power, Heater |
21-30 VAC, 50/60 Hz |
Control Data |
Biphase ± RS-232 RX/TX or RS-485 ± - optional control data (dip switch
selectable) |
Video |
BNC/UTP |
Audio Line In |
9 K Ohm typ, 5.5 Vp-p max |
EOLR Alarm Inputs (2) |
Programmable for “normally open”, “normally closed”, “normally
open-supervised”, “normally closed-supervised” |
Alarm Inputs (5) |
Programmable for “normally open” or “normally closed” |
Relay Out (1) |
Dry contact output rating: 2 A @ 30 VAC |
Open Collector Outputs (3) |
32 VDC@150 ma max. |
|
|
In-Ceiling |
Indoor Pendant , Outdoor Pendant |
DesignRating |
IP54,4 Plenum rated , IP665 , IP665 |
Operating Temp. |
–10°C to 40°C (14°F to 104°F) , –10°C to 40°C (14°F to 104°F) , –40°C to
50°C (–40°F to 122°F) with XT kit: –60°C to 50°C (–76°F to 122°F) |
Storage Temp. |
–40°C to 60°C (–40°F to 140°F) , –40°C to 60°C (–40°F to 140°F) , –40°C
to 60°C (–40°F to 140°F) |
Humidity |
0% to 90% relative, non-condensing , 0% to 90% relative, non-condensing
, 0% to 100% relative, condensing |
4. With optional VGA-IP54K-IC kit.5. Meets requirements for NEMA 4X
certification with use of a polycarbonate bubble. Meets requirements for
NEMA 4X, except impact test, with use of an acrylic bubble. |
|
|
|
Dimensions |
See dimensional drawings |
Weight |
|
In-ceiling |
2.66 kg (5.86 lb) |
Indoor Pendant |
2.88 kg (6.3 lb) |
Outdoor Pendant |
3.32 kg (7.3 lb) |
Bubble Size |
153.1 mm diameter (6.03 in.) |
Construction Material |
|
Housing |
Cast aluminum |
Bubble |
Pendant: Acrylic (high-resolution) In-ceiling: Polycarbonate (rugged) |
Color |
White (RAL 9003) |
Standard Finish |
Powder coated, sand finish |
|
|
Bubbles |
|
In-ceiling |
|
Clear rugged polycarbonate |
VGA-BUBBLE-CCLR |
Tinted rugged polycarbonate |
VGA-BUBBLE-CTIR |
Pendant |
|
Clear rugged polycarbonate |
VGA-BUBBLE-PCLR |
Tinted rugged polycarbonate |
VGA-BUBBLE-PTIR |
Clear high-resolution acrylic |
VGA-BUBBLE-PCLA |
Tinted high-resolution acrylic |
VGA-BUBBLE-PTIA |
Pendant Arm Mounts |
|
Wall Arm (No Transformer) |
VG4-A-PA0 |
Wall Arm (120/230 VAC Transformer) |
VG4-A-PA1 / VG4-A-PA2 |
Pendant Arm with Wiring |
VGA-PEND-ARM |
Mounting plate for VGA-PEND-ARM |
VGA-PEND-WPLATE |
Trim skirt for AUTODOME Series Power Supplies |
VG4-A-TSKIRT |
Optional Mounting Plates for Arm Mounts |
|
Corner Mounting Plate |
VG4-A-9542 |
Mast (Pole) Mounting Plate |
VG4-A-9541 |
Pendant Pipe Mounts |
|
Pipe Mount Cap |
VG4-A-9543 |
Pendant Roof Mounts |
|
Roof (Parapet) Mount(VG4-A-9543 Pipe Mount Cap required. Available
separately.) |
VGA-ROOF-MOUNT(1.5-inch NPT tapered male threads) |
Optional Mounting Plates for Roof Mounts |
|
Flat Roof Adapter for Parapet Mount |
LTC 9230/01 |
In-ceiling Support Kits |
|
Bracket for suspended or drop ceilings |
VGA-IC-SP |
Gasket kit for IP54 certification |
VGA-IP54K-IC |
Power Supplies |
|
Outdoor Power Supply Box, no transformer |
VG4-A-PSU0 |
Outdoor Power Supply Box (120/230 VAC Transformer) |
VG4-A-PSU1 / VG4-A-PSU2 |
Extended temp heater moduleextends temperature range to – 60°C (–76°F)
for outdoor pendants only |
VG4-SHTR-XT |
Fiber Optic Kit |
VGA-FIBER-AN |
|
|
|
|
|
|
Reference |
Description |
1 |
Wall Mount – Side with power supply |
1a |
Wall/Mast Mount – Side with VGA-PEND-WPLATE |
2 |
Wall Mount – Front with power supply and trim skirt |
2a |
Wall Mount – Front with power supply |
3 |
Wall Mount – Back with power supply and trim skirt |
3a |
Wall Mount – Back with power supply |
4 |
Pipe Mount |
5 |
In-ceiling Mount – Front |
6 |
In-ceiling Mount – Side |
Reference |
Description |
1 |
Wall Mount – Side with power supply and trim skirt |
1a |
Wall/Mast Mount – Side with VGA-PEND-WPLATE |
2 |
Wall Mount – Front with power supply and trim skirt |
2a |
Wall Mount – Front with power supply |
3 |
Wall Mount – Back with power supply and trim skirt |
3a |
Wall Mount – Back with power supply |
4 |
Pipe Mount |
5 |
Mast Mount |
6 |
Corner Mount |
7 |
Roof Mount |
8 |
Roof Mount Adapter |
9 |
Power Supply for Pipe and Roof Mounts |