Details
Bosch AUTODOME 7000 IP PTZ Dome Camera
AUTODOME 7000 Series Key Features
• Day/night IP camera with 28x or 36x optical zoom (12x digital zoom), Wide
Dynamic Range (WDR), and Sodium Vapour White Balance mode that restores objects
to their original colour
• New Intelligent Tracking and alarm rules engine with on-board Intelligent
Video Analytics (IVA)
• Enhanced system flexibility with dual recording options (iSCSI, SD card)
• Fully configurable quad streaming with individually configurable SD streams,
based on Bosch’s new Common Product Platform (CPP4)
• Easy and intuitive installation with multiple preconfigured user modes that
allow users to select the camera configuration that is ideal for their
applications
AUTODOME 7000 Series
The AUTODOME 7000 IP is an easy to install, highspeed PTZ dome camera, in a
field-proven housing suitable for indoor or outdoor installation, that delivers
unmatched picture quality and network performance day and night.
The camera provides complete network-based control of all dome functionality
including pan/tilt/zoom operation, presets, tours and alarms as well as web
based
configuration of all dome settings. It also provides direct network video
streaming using H.264 compression / bandwidth throttling to efficiently manage
bandwidth and storage requirements while delivering outstanding image quality.
AUTODOME 7000 Series Functions
High-performance PTZ day/night camera
The camera has a 1/4-in. CCD sensor, with 4CIF/D1 resolution and sensitivity to
below 1.0 lux, and is available with a choice of 28x and the industry-leading
36x optical zoom lens. Both camera options have a full 12x digital zoom and
provide D1 horizontal resolution for outstanding clarity and image detail. The
camera
also incorporates Wide Dynamic Range (WDR) technology that allows for the
capture of clear images from both bright and dark areas in the same frame. WDR
ensures that bright areas are not saturated and that dark areas are not too
dark.
Day/night capabilities and outstanding sensitivity make the camera an
exceptional performer in all lighting conditions. In low light, the camera
switches automatically from colour to monochrome by removing the IR filter to
boost the infrared illumination sensitivity, while maintaining superior image
quality. For operation in the darkest conditions, the SensUp control feature
automatically reduces the shutter speed to as little as one second. This
increases sensitivity by more than 50 times.
Progressive scan
The camera is ideally suited for IP imaging applications. The progressive scan
technology in the camera provides smooth and clear images when viewing images
from the camera.
Sodium vapour lamp white balance The camera is an exceptional performer when
capturing video under a sodium vapour lamp (a street lamp or tunnel lamp, for
example). Images under these conditions may have a yellowish tint, which may
make identification difficult. In the Sodium Vapour White Balance mode, the
camera automatically compensates for the light from a sodium vapour lamp to
restore objects to their original colour.
Virtual masking
The camera offers Virtual Masking, which gives users flexibility to mask parts
of the scene which should not be considered for flow analysis to trigger
Intelligent Tracking. This allows users to mask background motion in the scene
such as moving trees, pulsating lights, busy roads, etc.
Intelligent Tracking
The camera utilizes the built-in Intelligent Video Analytics (IVA) to follow an
individual or an object continuously. Objects detected by IVA when the camera is
in a stationary position activate the Intelligent Tracking feature, which
controls the pan/tilt/zoom actions of the camera to keep the tracked object in
the scene.
The new Intelligent Tracking is based on robust flow detection algorithms which
can reliably track moving objects even under challenging scenes.
The tracking and detection reliability can be enhanced further with virtual
masking for scenes with a lot of background motion such as trees or other
objects creating constant motion in the scene.
The camera supports three modes for Intelligent Tracking:
Auto mode: When configured in this mode, the camera actively analyzes the video
to detect any moving object. If it detects movement, it begins to track the
object. This mode is most useful for scenarios where normally no motion is
expected.
One Click mode: In this mode, users can click an object moving in the live video
image to enable the camera to track the movement of the selected object. This
mode is most useful for scenarios where normal scene activity is expected.
IVA-triggered mode: In this mode, the camera continuously analyzes the scene for
IVA alarms or IVA rule violations. If an IVA rule is violated, it triggers the
advanced tracking feature of the camera to start following the object / person
that triggered the alarm. This unique combination of robust IVA and Intelligent
Tracking allows the camera to track moving objects of interest without getting
distracted by other moving objects in the scene.
Intelligence
With built-in video content analysis, the AUTODOME reinforces the
Intelligence-at-the-Edge concept where edge devices become increasingly
intelligent.
The AUTODOME comes with Bosch’s Intelligent Video Analysis (IVA) built-in. IVA
is state-of-the-art intelligent video analysis that reliably detects, and
analyzes moving objects while suppressing unwanted alarms from spurious sources
in the image.
The IVA functionality built into the AUTODOME is able to detect idle and removed
objects as well as loitering, multiple line crossing, and trajectories. IVA also
supports BEV (Bird’s Eye View) People counting. Assisted Self Calibration and
configurable detection filters improve reliability and reduce operator work
load.
AUTODOME 7000 PTZ drive and mechanism
The AUTODOME 7000 supports 256 pre-positions and two styles of Guard Tours:
Preset and Record/Playback. Users can configure the preset standard tour with as
many as 256 sequential pre-positions, with a configurable dwell time between
pre-positions. The AUTODOME Series also provides support for two recorded tours,
which are recorded macros of an operator’s movements, including pan, tilt, and
zoom activities, and can be played back with the click of a button.
Pan and tilt preset repeatability are accurate to within ±0.1 degrees to ensure
that the correct scene is captured every time. The camera delivers variable
pan/tilt speeds from a crawl speed of only 0.1 degrees per second to a full 400
degrees per second. The camera is capable of pan speeds of 400 degrees per
second and tilt speeds of 300 degrees per second between prepositions. The
camera provides a tilt angle 18 degrees above the horizon, and a pan range of up
to
360 degrees continuous rotation.
The AutoScaling (proportional zoom) and AutoPivot (automatically rotates and
flips the camera) features ensure optimal control.
Five (5) pre-programmed user modes
Five pre-programmed but configurable user modes, optimized with the best
settings for a variety of typical applications, make camera programming on-site
easy and user-friendly. Users select from the menu the mode that best defines
the environment in which the camera is installed:
• Outdoor – general day-to-night changes with sun highlights and street lighting
• Indoor – general day-to-night changes without sun highlights and street
lighting
• Low light –optimized for sufficient details at low light
• Motion – monitoring traffic or fast moving objects; motion artefacts are
minimized
• Vibrant – enhanced contrast colour reproduction and sharpness
Users have the ability to customize these modes, if necessary, for the specific
requirements of the site.
Superior privacy masking
The camera provides 24 individual, easy to configure privacy masks, with up to 8
displayed in the same scene. As the camera is zoomed, each mask changes size
smoothly and quickly, ensuring that the covered object cannot be seen in most
cases.
Comprehensive streaming capabilities on Bosch’s Common Product Platform (CPP4)
The camera has an advanced, efficient H.264 encoder (CPP4) embedded for
DVD-quality streaming video and very efficient streaming and network
capabilities. The new platform supports simultaneous streaming of individually
configurable SD streams (H.264 and MJPEG), and allows a choice of SD resolution.
Recording and storage management
A memory card (SD (Secure Digital), SDHC (Secure Digital High Capacity), or SDXC
(Secure Digital eXtended Capacity)) can be used for local alarm recording or for
scheduled local recording to improve the overall recording reliability.
Recording management can be controlled by the Bosch Video Recording Manager
(VRM), or the camera can use iSCSI targets directly without any recording
software.
Advanced networking capabilities
The AUTODOME offers advanced capabilities so you can configure the camera to
take advantage of the latest networking technology.
The AUTODOME offers Quality of Service (QoS) configuration options to ensure
fast network response to PTZ data and images. Quality of Service (QoS) is the
set of techniques to manage network resources. QoS manages the delay, delay
variation (jitter), bandwidth, and packet loss parameters to guarantee the
ability of a network to deliver predictable results. QoS identifies the type of
data in a data packet and divides the packets into traffic classes that can be
prioritized for forwarding.
The AUTODOME also supports the IPv6 internet-layer protocol for packet-switched
internetworking across multiple IP networks. IPv6 uses 128-bit addresses (IPv4
uses 32-bit addressing), which allows for many more devices and users on the
internet as well as extra flexibility in allocating addresses and efficiency for
routing traffic.
Ease of installation and servicing
The camera has been designed for quick and easy installation; a key feature from
Bosch CCTV products. All housings feature recessed screws and latches for
increased tamper resistance.
AUTODOME in-ceiling housings provide IP54 protection. With an optional,
impact-resistant, rugged polycarbonate bubble (sold separately), they are rated
IK 8 (IEC 62262) to protect the camera from vandalism. The rugged bubble can
withstand impacts equivalent to a 4.5 kg (10 lb) weight dropped from a height of
3 m (10 ft). Indoor/outdoor pendant housings are rated to provide IP66
protection and offer an operating temperature range down to -40 °C (-40 °F). The
indoor/outdoor pendant comes fully assembled with a sunshield and ready for wall
or pipe applications with the proper mounting hardware (sold separately). In
addition, the camera models with pendant housing come equipped with a
low-impact, high-resolution acrylic bubble for enhanced image clarity. You can
easily convert the outdoor pendant for indoor applications by removing the
sunshield.
Bosch offers a full complement of hardware and accessories (sold separately) for
wall, corner, mast, roof, pipe mount, and in-ceiling applications, which allow
the camera to be adapted easily to individual site requirements.
Video management system support
The camera ships with Bosch Video Client (BVC), an easy-to-use software from
Bosch that is suitable for midsize installations. For large enterprise systems,
AUTODOME cameras can be used with Bosch Video Management System (BVMS), which
allows enhanced video management and viewing capabilities.
In addition, the camera is supported/integrated into all of the leading third
party video management systems.
ONVIF conformant
The AUTODOME Series conforms to the ONVIF Profile S specification allowing easy
integration with the conformant devices and VMS.
The camera conforms to the ONVIF (Open Network Video Interface Forum)
specification which guarantees interoperability between network video products
regardless of manufacturer. ONVIF conformant devices are able to exchange live
video, audio, metadata and control information. They are automatically
discovered and connected to network applications such as video management
systems.
Fiber Optic Kit
Bosch offers the optional VG4-SFPSCKT, a unique media converter module for use
with AUTODOME cameras. This media converter module is designed to accept a
wide-range of 10/100 Mbps SFP modules for use with Multimode or Single mode
optical fibre with LC or SC connectors.
The media converter module along with the SFP module is user-installed directly
into the camera‘s power supply box to provide an integrated fibre optic
solution.
Unsurpassed reliability
As with all Bosch products, the AUTODOME Series has been subjected to the
industry’s most comprehensive and demanding battery of endurance tests such as
HALT (highly accelerated life testing) to make sure it will hold up through
years of use. And of course, it comes with Bosch’s industry-leading 3-year
warranty.
Access security
Various security levels are available for accessing the network, the camera, and
the data channels. As well as password protection with three levels, 802.1x
authentication using a RADIUS (Remote Authentication Dial In User Service)
server is supported. To secure Web browser access, use HTTPS with a SSL
certificate stored in the camera. For total data protection, the video and audio
communication channels can be independently AES encrypted with 128-bit keys by
installing the optional encryption site license.
Easy upgrade
Remotely upgrade the camera whenever new firmware becomes available. This
ensures up-to-date products, thus protecting investment with little effort.
AUTODOME 7000 Series Specification
| Imager | 1/4 in.-type Exview HAD CCD (progressive scan) |
| Effective Picture Elements | PAL: Approx. 440,000; 752(H) x 582(V)NTSC: Approx. 380,000; 768 (H) x 494 (V) |
| Lens | 36x Zoom (3.4–122.4 mm) F1.6 to F4.5 |
| Focus | Automatic with manual override |
| Iris | Automatic with manual override |
| Zoom Movement Speed | NTSC , PAL |
| Optical WIDE / Optical TELE –Focus Tracking ON | 4.0 sec. , 4.0 sec. |
| Optical WIDE / Optical TELE –Focus Tracking OFF | 2.7 sec. , 2.7 sec. |
| Optical WIDE / Digital TELE | 6.0 sec. , 6.2 sec. |
| Digital WIDE / Digital TELE | 2.1 sec. , 2.3 sec. |
| Optical Zoom Field of View (FOV) | 1.7° to 57.8° |
| Minimum Working Distance | 320 mm (wide) to 1500 mm (tele) |
| Gain Control | Auto/Manual/Max. (–3 dB to 28 dB, 2 dB steps) |
| Synchronization | Line-Lock (–120° to 120° vertical phase adjust) or internal crystal |
| Aperture Correction | Horizontal and vertical |
| Digital Zoom | 12x |
| Sensitivity (typical) 1 | 30 IRE , 50 IRE |
| Day Mode | |
| SensUp Off(NTSC: 1/60sPAL: 1/50s) | 0.66 lux(0.061 fc) , 1.4 lux(0.13 fc) |
| SensUp On(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X) | 0.04 lux(0.0037 fc) , 0.1 lux(0.0092 fc) |
| Night Mode | |
| SensUp Off | 0.104 lux(0.0097 fc) , 0.209 lux(0.0194 fc) |
| SensUp On(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X) | 0.0052 lux(0.0005 fc) , 0.0103 lux(0.001 fc) |
| Electronic Shutter Speed | NTSC: 1/4 to 1/10,000 sec., 20 stepsPAL: 1/3 to 1/10,000 sec., 20 steps |
| Wide Dynamic Range (WDR) | 92 dB (50 dB with WDR Off) |
| Signal-to-Noise Ratio (SNR) | >50 dB (Weighting ON) |
| Backlight Compensation | On/Off |
| White Balance | ATW, Indoor, Outdoor, AWB Hold, Extended ATW, Manual, Outdoor Auto, Sodium Lamp Auto, Sodium Lamp |
| Day/Night | Monochrome, Color, Auto |
| Stabilization | On/Off |
| 1. Unless otherwise stated, test conditions are: F1.6; shutter = NTSC 1/60s, PAL 1/50s; max AGC; no bubble. Clear bubble adds 0.09 f-stop loss (90% light transmission). Tinted bubble adds 0.47 f-stop loss (60% light transmission). | |
| Imager | 1/4 in.-type Exview HAD CCD (progressive scan) |
| Effective Picture Elements | PAL: Approx. 440,000; 752(H) x 582(V)NTSC: Approx. 380,000; 768 (H) x 494 (V) |
| Lens | 28x Zoom (3.5–98.0 mm) F1.35 to F3.7 |
| Focus | Automatic with manual override |
| Iris | Automatic with manual override |
| Zoom Movement Speed | NTSC , PAL |
| Optical WIDE / Optical TELE –Focus Tracking ON | 2.5 sec. , 2.5 sec |
| Optical WIDE / Optical TELE – Focus Tracking OFF | 1.7 sec. , 1.7 sec. |
| Optical WIDE / Digital TELE – Focus Tracking ON | 4.5 sec. , 4.9 sec. |
| Optical WIDE / Digital TELE – Focus Tracking OFF | 1.7 sec. , 1.7 sec. |
| Digital WIDE / Digital TELE | 2.0 sec. , 2.5 sec. |
| Optical Zoom Field of View (FOV) | 2.1° to 55.8° |
| Minimum Working Distance | 300 mm (wide) to 1500 mm (tele) |
| Gain Control | Auto/Manual/Max. (–3 dB to 28 dB, 2 dB steps) |
| Synchronization | Line-Lock (-120° to +120° vertical phase adjust) or internal crystal |
| Aperture Correction | Horizontal and vertical |
| Digital Zoom | 12x |
| Sensitivity (typical) 2 | 30 IRE , 50 IRE |
| Day Mode | |
| SensUp Off | 0.33 lux(0.031 fc) , 0.66 lux(0.061 fc) |
| SensUp On(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X) | 0.02 lux(0.002 fc) , 0.04 lux(0.004 fc) |
| Night Mode | |
| SensUp Off | 0.066 lux(0.006 fc) , 0.166 lux(0.015 fc) |
| SensUp On(NTSC: 1/4s, 15X;PAL 1/3s, 16.7X) | 0.0026 lux(0.0002 fc) , 0.0082 lux(0.0008 fc) |
| Electronic Shutter Speed | NTSC: 1/4 to 1/10,000 sec., 20 stepsPAL: 1/3 to 1/10,000 sec., 20 steps |
| Wide Dynamic Range (WDR) | 92 dB (50 dB with WDR Off) |
| Signal-to-Noise Ratio (SNR) | >50 dB (Weighting ON) |
| Backlight Compensation | On/Off |
| White Balance | ATW, Indoor, Outdoor, AWB Hold, Extended ATW, Manual, Outdoor Auto, Sodium Lamp Auto, Sodium Lamp |
| Day/Night | Monochrome, Color, Auto |
| Stabilization | On/Off |
| 2. Unless otherwise stated, test conditions are: F1.6; shutter = NTSC 1/60s, PAL 1/50s; max AGC; no bubble. Clear bubble adds 0.09 f-stop loss (90% light transmission). Tinted bubble adds 0.47 f-stop loss (60% light transmission). | |
| In-Ceiling | Pendant |
| Pan Range | 360° cont. , 360° cont. |
| Tilt Angle | 1° above horizon , 18° above horizon |
| Pre-position Speed | Pan: 400°/sTilt: 300°/s , Pan: 400°/sTilt: 300°/s |
| Pan/Tilt Modes | |
| Turbo Mode(Manual Control) | Pan: 0.1°/s – 400°/sTilt: 0.1°/s – 300°/s |
| Normal Mode | 0.1°/s-120°/s , 0.1°/s-120°/s |
| Preset Accuracy | ± 0.1° typ. , ± 0.1° typ. |
| In-Ceiling | Pendant |
| Input Voltage | 21-30 VAC ,50/60 HzHigh PoE or PoE+ (IEEE 802.3at, class 4 standard) , 21-30 VAC, 50/60 Hzor High PoE |
| Power Consumption,typical | 24 W / 44 VA , 60 W / 69 VA (heaters on)or24 W / 44 VA3 (heaters off) |
| 3. Without heater connected in power supply box for indoor applications. | |
| Protection on Alarm Inputs | Peak current 17 A, peak power 300 W (8/20 μs) |
| Protection on Alarm Outputs | Peak current 2 A, peak power 300 W (8/20 μs) |
| Protection on Relay Output | Peak current 7.3 A, peak power 600 W (10/1000 μs) |
| Protection on Power Input (Dome) | Peak current 7.3 A, peak power 600 W (10/1000 μs) |
| Protection on PowerOutput (Arm Power Supply) | Peak current 21.4 A, peak power 1500 W (10/1000 μs) |
| 10/100 EthernetData Lines | Peak current 14 A, peak power 200 W (8/20 μs) |
| Camera Setup/Control | Via web browser (such as Internet Explorer version 7.0 or later), Bosch Configuration Manager, Bosch Video Management System (BVMS), Bosch Recording Station (BRS), or Bosch Video Client (BVC) |
| Software Update | Network firmware upload |
| Video compression | H.264 (ISO/IEC 14496‑10), M‑JPEG |
| Encoding / Streaming | |
| H.264 | MJPEG |
| Scenario | |
| Stream 1 | Stream 2 , Stream 3 , Stream 4 |
| 1 | 4CIF@30ips , 4CIF@30ips , I-frameonly fromStream 1 , 4CIF@30ips |
| 2 | 4CIF@30ips , Copy ofStream 1 , I-frameonly fromStream 1 , 4CIF@30ips |
| 3 | Downscaledstream , Downscaledstream , I-frameonly fromStream 1 , Downscaledstream fromStream 1 |
| GOP Structure | IP, IBP, IBBP |
| Data Rate | 9.6 kbps to10 Mbps (per stream) |
| Overall IP Delay | 240 ms |
| Resolution (Horizontal x Vertical, PAL/NTSC) | |
| 4CIF/D1 | 704 x 576/480 (25/30 ips, or 50/60 fields/s for interlaced fields) |
| CIF | 352 x 288/240 (25/30 ips, or 50/60 fields/s for interlaced fields) |
| Ethernet | 10-Base T/100 Base-TX, auto-sensing, half/full duplex, RJ45 |
| Protocols | IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, SNTP, SNMP (V1, MIB II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication |
| Advanced Networking | IPv6, QoS |
| Audio | |
| Standard | G.711, 8 kHz sampling rateL16, 16 kHz sampling rateAAC, 16 kHz sampling rate |
| Signal-to-Noise Ratio | >50 dB |
| Audio Streaming | Bidirectional (full duplex) |
| Memory Card Slot | User-supplied SD/SDHC/SDXC memory card (maximum 2TB – SDXC) |
| Recording | Continuous recording of video and audio, alarm/events/schedule recording |
| VG4-SFPSCKT | |
| Description | Fiber Optic Ethernet Media Converter kit5.Requires a small form-factor pluggable (SFP) module (sold separately). |
| Data Interface | Ethernet |
| Data Rate | 10/100 MbpsIEEE 802.3 CompliantFull Duplex or Half Duplex Electrical PortFull Duplex Optical Port |
| Compatible Receiver | CNFE2MC |
| Installation | Installed inside a VG4-A-PA0, VG4-A-PA1, VG4-A-PA2, VG4‑A‑PSU1, or a VG4‑A‑PSU2 power supply box with supplied mounting hardware |
| 5. Kit available separately and must be installed inside the AUTODOME power supply box. | |
| SFP Modules | |
| Description | Interchangeable modules available for use with MMF or SMF optical fiber. |
| Data Interface | Ethernet |
| Data Rate | 10/100 MbpsIEEE 802.3 Compliant |
| Mechanical | |
| Dimensions (LxWxH) | |
| SFP-2 and SFP-3 | 55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.) |
| SFP-25, SFP-26 | 63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.) |
| Weight (all SFP modules) | 0.23 kg (.05 lb) |
| Type | Connector , Wavelength (transmit / receive) , Max. Distance |
| SFP-2 | MMF , Duplex LC , 1310 nm / 1310 nm , 2 km (1.2 miles) |
| SFP-3 | SMF , Duplex LC , 1310 nm / 1310 nm , 20 km(12.4 miles) |
| SFP-25 | MMF , Single SC , 1310 nm / 1550 nm , 2 km(1.2 miles) |
| SFP-26 | MMF , Single SC , 1550 nm / 1310 nm , 2 km(1.2 miles) |
| Fiber Compatibility | |
| Optical Fiber Compatibility, MMF | 50/125 µm MMF. For 50/125 µm fiber, subtract 4 dB from the specified optical budget value. Must meet or exceed fiber standard ITU-T G.651. |
| Optical Fiber Compatibility, SMF | 8–10/125 µm SMF. Must meet or exceed fiber standard ITU-T G.652. |
| Optical Distance Specifications | Specified transmission distances are limited to the optical loss of the fiber and any additional loss introduced by connectors, splices, and patch panels. The modules are designed to operate over the entire optical loss budget range, so they do not require a minimum loss in order to operate. |
| Sectors/Titling | 16 independent sectors with a 20-character title/sector |
| Masking | 24 individually configurable privacy masks |
| Pre-positions | 256, each with a 20-character title |
| Guard Tours | Two (2) types of tours: Recorded tours – two (2) Preset tour – one (1), consisting of up to 256 scenes, consecutively |
| Supported Languages | English, Chinese, Dutch, French, German, Italian, Japanese, Polish, Portuguese, and Spanish |
| Power, Camera | RJ-45 10/100 Base-TX Ethernet (High Power-over-Ethernet (High PoE)) or PoE+ (IEEE 802.3at, class 4 standard)21-30 VAC, 50/60 Hz |
| Power, Heater | RJ-45 10/100 Base-TX Ethernet (High Power-over-Ethernet (High PoE))21-30 VAC, 50/60 Hz |
| Video and Control | RJ-45 10/100 Base-TX Ethernet |
| Alarm Inputs (7) | 2 supervised; 5 non-supervisedProgrammable for “normally open” or "normally closed" |
| Alarm Outputs (4) | 1 dry contact relay; 3 open collector/transistor outputs32 VDC @ 150 ma max. |
| Audio | 1 x mono line in, 1 x mono line out |
| Signal line in | 12 kOhm typical, 1 Vrms max |
| Signal line out | 1 Vrms at 1.5 kOhm, typical |
| In-Ceiling | Pendant |
| Ingress Protection Rating/Standard | IP54, Plenum rated , IP667 |
| NEMA 4X for:Access to Hazardous parts Ingress of solid foreign objects (falling dirt, circulating dust, settling dust) Ingress of water (dripping and light splashing, hosedown and splashing) Corrosive agents | |
| Operating Temp. | -10°C to 40°C(14°F to 104°F) , -40°C to 55°C(-40°F to 131°F)or-10°C to 55°C(14°F to 131°F)6 |
| Storage Temp. | -40°C to 60°C(-40°F to 140°F) , -40°C to 60°C(-40°F to 140°F) |
| Humidity | 0% to 90% relative, non-condensing , 0% to 100% relative, condensing |
| 6. Without heater connected in power supply box for indoor applications.7. Meets requirements for NEMA 4X certification with use of a polycarbonate bubble.Meets requirements for NEMA 4X, except impact test, with use of an acrylic bubble. | |
| Dimensions | See dimensional drawings |
| Weight | |
| In-ceiling | 2.58 kg (5.69 lb) |
| Indoor/Outdoor Pendant | 3.06 kg (6.75 lb) |
| Bubble Size | 153.1 mm diameter (6.03 in.) |
| Construction Material | |
| Housing | In-ceiling: MagnesiumPendant: Cast aluminum |
| Bubble | In-ceiling: High-resolution acrylic, rugged polycarbonate, or HD high-resolution acrylicPendant: High-resolution acrylic or rugged polycarbonate |
| Standard Color | White (RAL 9003) |
| Standard Finish | Powder coated, sand finish |
| Bubbles | |
| In-ceiling | |
| Clear high-resolution acrylic(Included with in-ceiling PAL camera models.) | VGA-BUBBLE-CCLA |
| Tinted high-resolution acrylic (Included with in-ceiling NTSC camera models.) | VGA-BUBBLE-CTIA |
| Clear rugged polycarbonate | VGA-BUBBLE-CCLR |
| Tinted rugged polycarbonate | VGA-BUBBLE-CTIR |
| Clear HD high-resolution acrylic | VGA-BUBHD-CCLA |
| Tinted HD high-resolution acrylic | VGA-BUBHD-CTIA |
| Pendant | |
| Clear high-resolution acrylic(Included with pendant camera models.) | VGA-BUBBLE-PCLA |
| Tinted high-resolution acrylic | VGA-BUBBLE-PTIA |
| Clear rugged polycarbonate | VGA-BUBBLE-PCLR |
| Tinted rugged polycarbonate | VGA-BUBBLE-PTIR |
| Pendant Arm Mounts | |
| Wall Arm (No Transformer) | VG4-A-PA0 |
| Wall Arm (120/230 VAC Transformer) | VG4-A-PA1 / VG4-A-PA2 |
| Pendant Arm with Wiring | VGA-PEND-ARM |
| Mounting plate for VGA-PEND-ARM | VGA-PEND-WPLATE |
| Trim skirt for VG4 Series Power Supplies | VG4-A-TSKIRT |
| Optional Mounting Plates for Arm Mounts | |
| Corner Mounting Plate | VG4-A-9542 |
| Mast (Pole) Mounting Plate | VG4-A-9541 |
| Pendant Pipe Mounts | |
| Pipe Mount Cap | VG4-A-9543 |
| Pendant Roof Mounts | |
| Roof (Parapet) Mount(VG4-A-9543 Pipe Mount Cap required. Available separately.) | VGA-ROOF-MOUNT(1.5-inch NPT tapered male threads) |
| Optional Mounting Plates for Roof Mounts | |
| Flat Roof Adapter for Parapet Mount | LTC 9230/01 |
| In-ceiling Support Kits | |
| Bracket for suspended or drop ceilings | VGA-IC-SP |
| Power Supplies | |
| High PoE Midspan 60W, single port, AC in | NPD-6001A |
| Outdoor Power Supply Box, no transformer | VG4-A-PSU0 |
| Outdoor Power Supply Box (120/230 VAC Transformer) | VG4-A-PSU1 / VG4-A-PSU2 |
| Fiber Optic Kit | VG4-SFPSCKT |
AUTODOME 7000 Series Ordering information
| Product Code | Description |
| VG5-7028-C1PC4 | AUTODOME 7000 IP 28x In-ceiling PAL with Clear Bubble |
| VG5-7028-C2PT4 | AUTODOME 7000 IP 28x In-ceiling NTSC with Tinted Bubble |
| VG5-7028-E1PC4 | AUTODOME 7000 IP 28x Indoor/Outdoor Pendant PAL with Clear Bubble |
| VG5-7028-E2PC4 | AUTODOME 7000 IP 28x Indoor/Outdoor Pendant NTSC with Clear Bubble |
| VG5-7036-E1PC4 | AUTODOME 7000 IP 36x Indoor/Outdoor Pendant PAL with Clear Bubble |
| VG5-7036-E2PC4 | AUTODOME 7000 IP 36x Indoor/Outdoor Pendant NTSC with Clear Bubble |
You have no items in your Quotation list.
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
