Details
Bosch AUTODOME 7000 IP PTZ Dome Camera
AUTODOME 7000 Series Key Features
• | High-resolution, full HD PTZ camera with 1080p25/30 (2MP) resolution and 20x zoom for capturing fine details |
• | New Intelligent Tracking and alarm rules engine with on-board Intelligent Video Analytics (IVA) |
• | Enhanced system flexibility with dual recording options (iSCSI, SD card) and dual power source options (High Power over Ethernet (High PoE) / 24 VAC) |
• | Fully configurable quad streaming with individually configurable HD streams, based on Bosch’s new Common Product Platform (CPP4) |
• | Easy and intuitive installation with multiple preconfigured user modes that allow users to select the camera configuration that is ideal for their applications |
AUTODOME 7000 Series Description
The AUTODOME 7000 HD is an easy to install, highspeed PTZ dome camera, in a
field-proven indoor/ outdoor pendant housing or indoor in-ceiling housing, that
delivers unmatched picture quality and network performance day and night with
superb high-definition (HD) 1080p25/30 (2MP) video and 20x optical zoom. The
camera provides complete network-based control of all dome functionality
including pan/tilt/zoom operation, presets, tours and alarms as well as web
based
configuration of all dome settings. It also provides direct network video
streaming using H.264 compression / bandwidth throttling to efficiently manage
bandwidth and storage requirements while delivering outstanding image quality.
AUTODOME 7000 Series Functions
High-performance PTZ day/night camera
The camera has a large, effective sensor area that contributes to very high
camera sensitivity. The camera can be configured to operate in 720p50/60 mode
for capturing fast motion (for example, in traffic
or gaming scenarios). The default 1080p25/30 mode
delivers high resolution images with six times more
details than a standard definition (SD) camera.
Wide Dynamic Range
The camera features Wide Dynamic Range (WDR) technology that allows for the
capture of clear images from both bright and dark areas in the same frame. WDR
ensures that bright areas are not saturated and that dark areas are not too
dark.
Sodium vapour lamp white balance
The camera is an exceptional performer when capturing video under a sodium
vapour
lamp (a street lamp or tunnel lamp, for example). Uncorrected images under these
conditions have a yellowish tint, which can make identification difficult. In
the Sodium Vapour White Balance mode, the camera automatically compensates for
the light from a sodium vapour lamp to restore objects to their original colour.
Virtual masking
The camera offers Virtual Masking, which gives users flexibility to mask parts
of the scene which should not be considered for flow analysis to trigger
Intelligent Tracking. This allows users to mask background motion in the scene
such as moving trees, pulsating lights, busy roads, etc.
Intelligent Tracking
The camera utilizes the built-in Intelligent Video Analytics (IVA) to follow an
individual or an object continuously. Objects detected by IVA when the camera is
in a stationary position activate the Intelligent Tracking feature, which
controls the pan/tilt/zoom actions of the camera to keep the tracked object in
the scene.
The new Intelligent Tracking is based on robust flow detection algorithms which
can reliably track moving objects even under challenging scenes.
The tracking and detection reliability can be enhanced further with virtual
masking for scenes with a lot of background motion such as trees or other
objects creating constant motion in the scene.
The camera supports three modes for Intelligent Tracking:
Auto mode:
When configured in this mode, the camera actively analyzes the video to detect
any moving object. If it detects movement, it begins to track the object. This
mode is most useful for scenarios where normally no motion is expected.
One Click mode:
In this mode, users can click an object moving in the live video image to enable
the camera to track the movement of the selected object. This mode is most
useful for scenarios where normal scene activity is expected.
IVA-triggered mode:
In this mode, the camera continuously analyzes the scene for IVA alarms or IVA
rule violations. If an IVA rule is violated, it triggers the advanced tracking
feature of the camera to start following the object / person that triggered the
alarm. This unique combination of robust IVA and Intelligent Tracking allows the
camera to track moving objects of interest without getting distracted by other
moving objects in the scene.
Intelligence
With built-in video content analysis, the AUTODOME reinforces the
Intelligence-at-the-Edge concept where edge devices become increasingly
intelligent. The AUTODOME comes with Bosch’s Intelligent Video Analysis (IVA)
built-in. IVA is state-of-the-art intelligent video analysis that reliably
detects, and analyzes moving objects while suppressing unwanted alarms from
spurious sources in the image.
The IVA functionality built into the AUTODOME is able to detect idle and removed
objects as well as loitering, multiple line crossing, and trajectories. IVA also
supports BEV (Bird’s Eye View) People counting. Assisted Self Calibration and
configurable detection filters improve reliability and reduce operator work
load.
AUTODOME 7000 PTZ drive and mechanism
The AUTODOME 7000 supports 256 pre-positions and two styles of Guard Tours:
Preset and Record/Playback. Users can configure the preset standard tour with as
many as 256 sequential pre-positions, with a configurable dwell time between
pre-positions. The AUTODOME Series also provides support for two recorded tours,
which are recorded macros of an operator’s movements, including pan, tilt, and
zoom activities, and can be played back with the click of a button.
Pan and tilt preset repeatability are accurate to within ±0.1 degrees to ensure
that the correct scene is captured every time. The camera delivers variable
pan/tilt speeds from a crawl speed of only 0.1 degrees per second to a full 400
degrees per second. The camera is capable of pan speeds of 400 degrees per
second and tilt speeds of 300 degrees per second between prepositions. The
camera provides a tilt angle 18 degrees above the horizon, and a pan range of up
to 360 degrees continuous rotation.
Five (5) pre-programmed user modes
Five pre-programmed but configurable user modes, optimized with the best
settings for a variety of typical applications, make camera programming on-site
easy and user-friendly. Users select from the menu the mode that best defines
the environment in which the camera is installed:
• Outdoor – general day-to-night changes with sun highlights and street lighting
• Indoor – general day-to-night changes without sun highlights and street
lighting
• Low light –optimized for sufficient details at low light
• Motion – monitoring traffic or fast moving objects; motion artefacts are
minimized
• Vibrant – enhanced contrast colour reproduction and sharpness
Users have the ability to customize these modes, if necessary, for the specific
requirements of the site.
Superior privacy masking
The camera provides 24 individual, easy to configure privacy masks, with up to 8
displayed in the same scene. As the camera is zoomed, each mask changes size
smoothly and quickly, ensuring that the covered object cannot be seen in most
cases.
Comprehensive streaming capabilities on Bosch’s Common Product Platform (CPP4)
The camera has an advanced, efficient H.264 encoder (CPP4) embedded for high
quality HD streaming video and very efficient streaming and network
capabilities. The new platform supports simultaneous streaming of individually
configurable HD streams, and allows a choice of HD resolution in combination of
SD resolutions.
Recording and storage management
A memory card (SD (Secure Digital), SDHC (Secure Digital High Capacity), or SDXC
(Secure Digital eXtended Capacity)) can be used for local alarm recording or for
scheduled local recording to improve the overall recording reliability.
Recording management can be controlled by the Bosch Video Recording Manager
(VRM), or the camera can use iSCSI targets directly without any recording
software.
Advanced networking capabilities
The AUTODOME offers advanced capabilities so you can configure the camera to
take advantage of the latest networking technology.
The AUTODOME offers Quality of Service (QoS) configuration options to ensure
fast network response to PTZ data and images. Quality of Service (QoS) is the
set of techniques to manage network resources. QoS manages the delay, delay
variation (jitter), bandwidth, and packet loss parameters to guarantee the
ability of a network to deliver predictable results. QoS identifies the type of
data in a data packet and divides the packets into traffic classes that can be
prioritized for forwarding.
The AUTODOME also supports the IPv6 internet-layer protocol for packet-switched
internetworking across multiple IP networks. IPv6 uses 128-bit addresses (IPv4
uses 32-bit addressing), which allows for many more devices and users on the
internet as well as extra flexibility in allocating addresses and efficiency for
routing traffic.
Dual power options
All models can be powered by a High Power-over-Ethernet (Bosch High PoE)-compliant
network using a Bosch High PoE Midspan (sold separately) over a single network
cable and/or a 24VAC power supply. Certain models can also be powered by any PoE+
Power Sourcing Equipment (PSE; midspan or switch) that is compliant to the IEEE
802.3at, class 4 standard and/or a 24 VAC power supply.
When powered using High PoE or PoE+ (IEEE 802.3at class 4) configuration, only a
single cable connection is required to power and to control the camera while
also viewing images from the camera. For additional system reliability, users
also have the option to connect the 24 VAC power supply to the camera while
using High PoE.
Only in-ceiling models and indoor/outdoor pendant models used in indoor
applications (without heaters on) can use High PoE or PoE+ (including non-Bosch
PoE+ PSE).
Ease of installation and servicing
The camera has been designed for quick and easy installation; a key feature from
Bosch CCTV products. All housings feature recessed screws and latches for
increased tamper resistance.
Indoor/outdoor pendant housings are rated to provide IP66 protection and offer
an operating temperature range down to -40 °C (-40 °F). The indoor/outdoor
pendant comes fully assembled with a sunshield and ready for wall or pipe
applications with the proper mounting hardware (sold separately). In addition,
the camera models with both pendant and in-ceiling housing come equipped with a
low-impact, high resolution acrylic bubble for enhanced image clarity. You can
easily convert the outdoor pendant for indoor applications by removing the
sunshield. Bosch offers a full complement of hardware and accessories (sold
separately) for wall, corner, mast, roof, pipe mount, and in-ceiling
applications for indoor and outdoor environments, which allow the camera to be
adapted easily to individual site requirements.
Video management system support
The camera ships with Bosch Video Client (BVC), an easy-to-use software from
Bosch that is suitable for midsize installations. For large enterprise systems,
AUTODOME cameras can be used with Bosch Video Management System (BVMS), which
allows enhanced video management and viewing capabilities. In addition, the
camera is supported/integrated into all of the leading third party video
management systems.
ONVIF conformant
The AUTODOME Series conforms to the ONVIF Profile S specification allowing easy
integration with the conformant devices and VMS.
The camera conforms to the ONVIF (Open Network Video Interface Forum)
specification which guarantees interoperability between network video products
regardless of manufacturer. ONVIF conformant devices are able to exchange live
video, audio, metadata and control information. They are automatically
discovered and connected to network applications such as video management
systems.
Fiber Optic Kit
Bosch offers the optional VG4-SFPSCKT, a unique media converter module for use
with AUTODOME cameras. This media converter module is designed to accept a
wide-range of 10/100 Mbps SFP modules for use with Multimode or Single mode
optical fibre with LC or SC connectors.
The media converter module along with the SFP module is user-installed directly
into the camera‘s power supply box to provide an integrated fibre optic
solution.
Unsurpassed reliability
As with all Bosch products, the camera has been subjected to the industry’s most
comprehensive and demanding battery of endurance tests such as HALT (highly
accelerated life testing) to make sure it will hold up through years of use. And
of course, it comes with Bosch’s industry-leading 3-year warranty.
Access security
Various security levels are available for accessing the network, the camera, and
the data channels. As well as password protection with three levels, 802.1x
authentication using a RADIUS (Remote Authentication Dial In User Service)
server is supported. To secure Web browser access, use HTTPS with a SSL
certificate stored in the camera. For total data protection, the
video and audio communication channels can be independently AES encrypted with
128-bit keys by installing the optional encryption site license.
Easy upgrade
Remotely upgrade the camera whenever new firmware becomes available. This
ensures up-to-date products, thus protecting investment with little effort.
AUTODOME 7000 Series Certifications and approvals
HD standards
• Complies with the SMPTE 274M-2008 Standard in:
– Resolution: 1920x1080
– Scan: Progressive
– Colour representation: complies with ITU-R BT.709
– Aspect ratio: 16:9
– Frame rate: 25 and 30 frames/s
• Complies with the 296M-2001 Standard in:
– Resolution: 1280x720
– Scan: Progressive
– Colour representation: complies with ITU-R BT.709
– Aspect ratio: 16:9
– Frame rate: 25, 30, 50 and 60 frames/s
AUTODOME 7000 Series Ordering information
Product Code | Description |
VG5-7220-CPT4 | AUTODOME 7000 HD 20x In-ceiling |
VG5-7220-EPC4 | AUTODOME 7000 HD 20x Indoor/Outdoor Pendant |