Details
Bosch VIP X1 XF E Single-channel Video Encoder
VIP-X1XF-E Key Features
• | Single-channel H.264 encoder with Dual Streaming |
• | SD card and iSCSI recording |
• | Multicast and Internet streaming |
• | Alarm input and relay output |
• | ONVIF conformant |
VIP-X1XF-E Description
VIP X1 XF E features DVD-like quality H.264 video, at up to 25/30 images per
second, over IP networks. The unit supports PAL and NTSC sources and provides a
basic motion detector.
The encoder provides bidirectional audio communication in parallel to video. VIP
X1 XF E provides Dual Streaming. It is able to generate two independently
configurable video streams. VIP X1 XF E is ultra-compact, so it is perfect for
any application that depends on space-saving solutions.
VIP-X1XF-E Functions
Flexibility
VIP X1 XF E encoders offer unparalleled recording flexibility. Record on
network-attached RAID iSCSI storage devices or locally on SD cards. The built-in
iSCSI support enables VIP X1 XF E encoders to act as conventional DVRs while
streaming high-performance live video across the network.
Dual Streaming
VIP X1 XF E encoders use Dual Streaming to generate two independent IP video
streams per channel if sufficient computational power is available. This allows
viewing and recording at two different quality levels to save disk space and
bandwidth. On alarm, they can send an e‑mail with JPEG images attached.
Dual H.264 Recording
You can record the streams independently on different media. Thus video can be
recorded centrally on iSCSI drives managed by VRM Video Recording Manager and
redundantly on the local media. If necessary, for example in case of a network
failure VRM can fill up the gap in the central recording (ANR, Automatic Network
Replenishment).
Recording Profiles
The encoders feature a highly flexible recording scheduler, providing up to ten
programmable recording profiles and allowing individually assigned camera
profiles. With these profiles, you can accelerate the frame rate as well as
increase the resolution on alarm, saving recording space during non-alarm
periods.
Access Security
VIP X1 XF E encoders offer various security levels for accessing the network,
the unit, and the data channels. As well as password protection with three
levels, they support 802.1x authentication using a RADIUS server for
identification. You can secure Web browser access by HTTPS using a SSL
certificate that is stored in the unit. For total data protection, each
communication channel—video, audio, or serial I/O can be independently AES
encrypted with 128‑bit keys, once the Encryption Site License has been applied.
Intelligence
VIP X1 XF E comes with built-in MOTION+ video motion detection. This motion
detection algorithm is based on pixel change and includes object size filtering
capabilities and sophisticated tamper detection capabilities.
Viewing
View VIP X1 XF E encoder video on a PC using a Web browser, in the Bosch Video
Management System, or integrate it into another video management system. By
routing the IP video to a high-performance VIP XD HD decoder, you can present
the video with ultimate clarity.
Easy Upgrade
Remotely upgrade VIP X1 XF E encoders whenever new firmware becomes available.
This ensures up-to date products, thus protecting investment with little effort.
ONVIF conformance
Firmware 4.5x introduces conformance to the ONVIF (Open Network Video Interface
Forum) specification guaranteeing interoperability between network video
products regardless of manufacturer. ONVIF conformant devices are able to
exchange live video, audio, metadata and control information and ensure that
they are automatically discovered and connected to network applications such as
video management systems.
VIP-X1XF-E Specification
Electrical | |
Power supply | Via external unit |
Input voltage | 12 VDC |
Current consumption | 0.30 A max |
Power consumption | Approx. 3.6 W |
Input/output | |
Video | 1 x input |
connector | BNC |
impedance | 75 ohm, switchable |
signal | Analog composite, 0.7 to 1.2 Vpp, NTSC or PAL |
Audio | 1 x mono line in, 1 x mono line out |
connector | 3.5 mm stereo jack |
signal line in | 9 kohm typical, 5.5 Vpp max |
signal line out | 3.0 Vpp at 10 kohm typical,2.3 Vpp at 32 ohm typical,1.7 Vpp at 16 ohm typical |
Alarm | 1 x input |
connector | Clamp (non-isolated closing contact) |
activation resistance | 10 ohm max |
Relay | 1 x output |
connector | Clamp |
signal | 30 Vpp (SELV), 0.2 A |
COM port | Clamp, RS‑232/422/485 |
Video | |
Standards | H.264 MP, H.264 BP+ (ISO/IEC 14496‑10), M‑JPEG, JPEG |
Data rates | 9.6 kbps to 6 Mbps |
Resolution | Horizontal x vertical PAL/NTSC |
4CIF/D1 | 704 x 576/480 (25/30 ips) |
CIF | 352 x 288/240 (25/30 ips) |
GOP structure | I, IP, IPBB, IBBRBP |
Overall IP delay | 240 ms max |
Frame rate | 1 to 50/60 (PAL/NTSC) |
Audio | |
AAC | |
Profile | AAC-LC |
Frequency rate | 300 Hz to 6.4 kHz |
Data rate | 48/80 kbps at 16 kHz sampling rate |
G.711 | |
Frequency rate | 300 Hz to 3.4 kHz |
Data rate | 80 kbps at 8 kHz sampling rate |
L16 | |
Frequency rate | 300 Hz to 6.4 kHz |
Data rate | 640 kbps at 16 kHz sampling rate |
Signal-to-noise ratio | > 50 dB |
Network | |
Ethernet | 10/100 Base‑T, auto-sensing, half/full duplex, RJ45 |
Protocols | IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, NTP (SNTP), SNMP (V1, MIB-II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication |
Encryption | TLS 1.0, SSL, DES, 3DES, AES |
Control | |
Software update | Flash ROM, remote programmable |
Configuration | Configuration Manager or web browser |
Camera control | Via serial interface; supported* protocols and devices: |
Bosch | AUTODOME, HSPT, MIC1‑300 IP, TC8x00 |
Canon | VCC1, VC-C4R |
CBC | SMD 12P/12PII/20P |
JVC | TK-C676 |
Panasonic | WV-CS850 |
Pelco | Spectra D/P |
Sensomatic | SpeedDome Ultra |
Sony | EVI D30/31/D100 |
Ultrak | KD6 |
VT | VPT4x |
* Basic functions only, no claim for full functionality valid. Bosch may not be made responsible if functions are not implemented or not working under all circumstances. | |
Connections | |
SD card interface | 1 x SD card |
Mechanical | |
Dimensions (H x W x D) | 36 x 88 x 118 mm (1.42 x 3.46 x 4.65 in) |
Weight | Approx. 0.25 kg (0.55 lb) |
Environmental | |
Operating temperature | 0 °C to +60 °C (+32 °F to +140 °F) ambient temperature |
Relative humidity | 0 to 95% atmospheric humidity, non-condensing |
Thermal value | 13 BTU/h max |