Details
Bosch VIP X1 XF Single-channel Video Encoder
VIP-X1XF Key Features
• | Single-channel H.264 encoder with Dual Streaming |
• | Built-in analytics VCA |
• | SD card and iSCSI recording |
• | Multicast and Internet streaming |
• | ONVIF conformant |
VIP-X1XF Description
The VIP X1 XF encoders feature DVD-like quality H.264 video, at up to 25/30
images per second, over IP networks. The devices support PAL and NTSC sources
and are available in a standard version that supports Bosch VCA (video content
analysis) algorithms. The encoders provide bidirectional audio communication in
parallel to video.
They also provide Dual Streaming and therefore are able to generate two
independently configurable video streams. The devices are ultra-compact, so they
are perfect for any application that depends on spacesaving solutions.
VIP-X1XF Functions
Flexibility
The encoders offer unparalleled recording flexibility. Record on
network-attached RAID iSCSI storage devices or locally on SD cards. The built-in
iSCSI support enables the devices to act as conventional DVRs while streaming
high-performance live video across the network.
Triple streaming
The encoders use Dual Streaming to generate two independent H.264 video streams
per channel. This allows viewing and recording at two different quality levels
to save disk space and bandwidth. As a third stream for easier third-party
integration they provide an independently configured M‑JPEG stream. On alarm,
they can send an e‑mail with JPEG images attached.
Dual H.264 recording
You can record the streams independently on different media. Thus video can be
recorded centrally on iSCSI drives managed by VRM Video Recording Manager and
redundantly on the local media.
Recording profiles
The encoders feature a highly flexible recording scheduler, providing up to ten
programmable recording profiles and allowing individually assigned camera
profiles. With these profiles, you can accelerate the frame rate as well as
increase the resolution on alarm, saving recording space during non-alarm
periods.
Access security
The devices offer various security levels for accessing the network, the unit,
and the data channels. As well as password protection with three levels, they
support 802.1x authentication using a RADIUS server for identification. You can
secure Web browser access by HTTPS using a SSL certificate that is stored in the
unit. For total data protection, each communication channel — video, audio, or
serial I/O — can be independently AES encrypted with 128‑bit keys, once the
Encryption Site License has been applied.
Intelligence
With built-in VCA, the VIP X1 XF encoders reinforce the Intelligence-at-the-Edge
concept where edge devices become increasingly intelligent. The encoders come
with built-in MOTION+ video motion detection. This motion detection algorithm is
based on pixel change and includes object size filtering capabilities and
sophisticated tamper detection capabilities. Bosch offers more advanced VCA
applications with its IVA (Intelligent Video Analysis). A licensable option, it
bases the IVA algorithm on digital imaging technology that uses multi-level
image analysis of pixel, texture, and motion (trajectory) changes.
Viewing
View the encoder video on a PC using a Web browser, in the Bosch Video
Management System, or integrate into another video management system. By routing
the IP video to a high-performance VIDEOJET decoder device you can present the
video with ultimate clarity.
Camera control
Configure and control your camera or dome using one of the various pre-defined
control protocols. VIP X1 XF encoders provide a serial interface and
alternatively support Bilinx communication over coax cable.
Easy upgrade
Remotely upgrade the encoders whenever new firmware becomes available. This
ensures up-to-date products, thus protecting investment with little effort.
ONVIF conformance
Conformance to ONVIF 1.02 and ONVIF Profile S provides interoperability between
network video products regardless of manufacturer. In addition, the firmware of
the device supports all applicable features of the ONVIF 2.2 specification.
ONVIF conformant devices are able to exchange live video, audio, metadata, and
control information and ensure that they are automatically discovered and
connected to network applications such as video management systems.
VIP-X1XF Specification
Electrical | |
Power supply | Via external unit |
Input voltage | 9 to 30 VDC |
Current consumption | 0.65 A max |
Power consumption | Approx. 6 W |
Input/output | |
Video | 1 x input |
connector | BNC |
impedance | 75 ohm, switchable |
signal | Analog composite, 0.7 to 1.2 Vpp, NTSC or PAL |
Audio | 1 x mono line in, 1 x mono line out |
connector | 3.5 mm stereo jack |
signal line in | 9 kohm typical, 5.5 Vpp max |
signal line out | 3.0 Vpp at 10 kohm typical,2.3 Vpp at 32 ohm typical,1.7 Vpp at 16 ohm typical |
Alarm | 2 x input |
connector | Clamp (non-isolated closing contact) |
activation resistance | 10 ohm max |
Relay | 2 x output |
connector | Clamp |
signal | 30 Vpp (SELV), 0.2 A |
COM port | Clamp, RS‑232/422/485 |
Video | |
Standards | H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG |
Data rates | 9.6 kbps to 6 Mbps |
Resolution | Horizontal x vertical PAL/NTSC |
4CIF/D1 | 704 x 576/480 (25/30 ips) |
CIF | 352 x 288/240 (25/30 ips) |
GOP structure | I, IP, IPBB, IBBRBP |
Overall IP delay | 240 ms max |
Frame rate | 1 to 50/60 (PAL/NTSC) |
Audio | |
AAC | |
Profile | AAC-LC |
Frequency rate | 300 Hz to 6.4 kHz |
Data rate | 48/80 kbps at 16 kHz sampling rate |
G.711 | |
Frequency rate | 300 Hz to 3.4 kHz |
Data rate | 80 kbps at 8 kHz sampling rate |
L16 | |
Frequency rate | 300 Hz to 6.4 kHz |
Data rate | 640 kbps at 16 kHz sampling rate |
Signal-to-noise ratio | > 50 dB |
Network | |
Ethernet | 10/100 Base‑T, auto-sensing, half/full duplex, RJ45 |
Protocols | IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, NTP (SNTP), SNMP (V1, MIB-II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication |
Encryption | TLS 1.0, SSL, DES, 3DES, AES |
Control | |
Software update | Flash ROM, remote programmable |
Configuration | Configuration Manager or web browser |
Camera control | Via serial interface; supported* protocols and devices: |
Bosch | AUTODOME, HSPT, MIC1‑300 IP, TC8x00 |
Canon | VCC1, VC-C4R |
CBC | SMD 12P/12PII/20P |
JVC | TK-C676 |
Panasonic | WV-CS850 |
Pelco | Spectra D/P |
Sensomatic | SpeedDome Ultra |
Sony | EVI D30/31/D100 |
Ultrak | KD6 |
VT | VPT4x |
* Basic functions only, no claim for full functionality valid. Bosch may not be made responsible if functions are not implemented or not working under all circumstances. | |
Connections | |
SD card interface | 1 x SD card |
Mechanical | |
Dimensions (H x W x D) | 36 x 88 x 118 mm (1.42 x 3.46 x 4.65 in) |
Weight | Approx. 0.25 kg (0.55 lb) |
Environmental | |
Operating temperature | 0 °C to +50 °C (+32 °F to +122 °F) ambient temperature |
Relative humidity | 0 to 95% atmospheric humidity, non-condensing |
Thermal value | 17 BTU/h max |