Details
Panasonic 14" colour monitor with built in switcher
WV-CM143 Key Features
- The Panasonics WV-CM143 Colour Monitor is designed for use with Panasonic Line-Fed CCTV Cameras.
- Up to four cameras can be connected with this monitor, with sequential or manual switching available.
- Alarm sensor and intercom connection.
WV-CM143 Other Features
- As many as 4 Solid State Colour Cameras can be connected to Colour Monitor WV-CM 143 with an alarm feature.
- This Colour Cameras can be added by using the Camera Extension Unit WV-AD1 bA.
- One video output displays each camera in sequence and any camera switched to the spot monitor position for the use of an additional monitor or video tape recorder.
- Monitor has 14’ diagonal screen (13 diagonal actual visual size)
- Sequential switching interval selectable from 1, 2, 3, 4, 5, 6, 7, 8, 9,10, 20 or 30 sec.
- Built-in protection circuit for any misconnection.
- STANDBY mode for no picture on the monitor during the sequential switching.
- Alarm control output for a buzzer or chime.
- Alarm period selectable from 1, 5,10, 20, 30, 40, 50 or 60 sec.
- The CCTV camera with michrophone can be connected with this monitor.
- VTR playback picture can be observed.
- Reset input for sequential switching from Time Lapse VTR.
- Automatic bypass circuit for skipping no camera connection.
- Built-in Automatic Reset Selection function for Spot Monitor Control Input. The automatic reset time is preset to approx. 60 seconds.
- Bright Compensation Setting
- The specified Colour CCTV System Camera (Multiplexed VD (VD2) with gen-Iock) can be used with this monitor Due to the Camera Power Selection Switch. (CAMERA INPUT 1 Connector)
- The following functions are available by using the Set Up menu.
Camera Identification Display
Audio Selection
Timing Selection
Sequential Time Adjustment
Alarm Buzzer Setting
Alarm Time Adjustment
Automatic Reset