Details
Panasonic Mega Pixel Colour Network Camera
WV-NP1000 Key Features
• | MPEG-4/JPEG digital signal output at VGA image size with up to 30 ips |
• | MPEG-4 and JPEG dual stream output for simultaneous real time monitoring and high resolution recording |
• | Progressive output provides clear images, even when the subject is moving. |
• | High sensitivity with Day/Night function: 1.0 lux (Color), 0.06 lux (B/W) at F1.4. IR cut filter switches on/off to enhance the sensitivity in B/W mode. |
• | Adaptive Digital Noise Reduction: Integration of 2D-DNR and 3DDNR ensures noise reduction in various conditions. |
• | Electronic sensitivity enhancement: Auto (Up to 10x) / Manual (Up to 32x) |
• | Electronic shutter: Up to 1/10,000 sec. |
• | VMD (Video Motion Detector) with 4 programmable detection areas and 3 sensitivity levels. |
• | Up to 8 Privacy zones |
• | Auto Image Stabilizer for applications where vibration or wind is a concern. |
• | Flexible digital zoom and pan/tilt operation: Up to 5x variable digital zoom and pan/tilt can be set in the setup menu or controlled by a system controller (effective both for analog and network video). 2x or 4x digital zoom and pan/tilt can be controlled by the browser GUI for network video. |
• | Internal / Multiplexed Vertical Drive (VD2) synchronization |
• | Camera title displays: Up to 16 (OSD) and 20 (on browser) alphanumeric characters |
• | SD Memory card slot for alarm recording and backup upon network failure. Recorded dada can be downloaded by using FTP command. |
• | ABF (Auto Back Focus) ensures easy installation and stable focus in both color and B/W modes. |
• | Alarm sources including Terminal input, VMD and Panasonic alarm command can trigger actions including SD memory recording/FTP image transfer, E-mail notification, Alarm indication, Terminal output and Panasonic protocol output. |
• | Built-in microphone for audio (1-way) |
• | Built-in network interface (10Base-T / 100Base-TX) |
• | Multiscreen: Images from 8 cameras can be displayed in 2 separate Quad screens (JPEG only). 20 characters camera title is available for each camera. |
• | FTP client function enables periodic image data transfer or transfer upon alarm. |
• | Alarm e-mail notification |
• | Max. bit rate/client for MPEG-4 (64 / 128 / 256 / 512 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 kbps) and Total bit rate control (64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096 kbps / 10 Mbps / Unlimited) allowing flexible network management. |
• | Supported Protocol: TCP/IP, UDP/IP, HTTP, RTP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP |
• | Multi-language GUI and setup menu: English, French, Italian, Spanish, German, Russian, Chinese (PAL) / English, French (NTSC) * Installation required except for English |
• | Lens Optional |