Details
Panasonic Camera Controller for RS485
WV-RM70 Key Features
• | Provides RS-485 remote setup and control of integrated cameras using the system 500 with an optional WV-PB5548 RS-485 card |
• | Provides direct remote control of the digital setup functions on the WV-BP550 and WV-CP650 series cameras |
• | May also be used with the WJ-SW208 switcher to control up to 8 cameras if digital motion detection is not used |
WV-RM70 Description
The WV-RM70 Camera Controller, when combined with the optional WV-CP610 and
WV-BP510 series CCTV Camera, enables remote control of camera settings. Also it
is available to receive the alarm (motion detector) signal multiplexed with the
video signal from the WV-CP610 and WV-BP510 series camera.
The WV-RM70 Camera Controller enables remote control
of the following functions:
• | Remote control of camera settings for the WVCP610 and WV-BP510 series camera, including Electronic Sensitivity Up, Electronic Shutter, and more. | |
• | Remote control of camera and auxiliary equipment, by using optional receiver and accessories, including: | |
1. | Remote control of Pan/Tilt Head and Camera Housing. | |
2. | Remote control of Motorized Zoom Lens : Focus, Zoom and Iris. |
Also it is available to receive the alarm (motion detector) signal multiplexed
with the video signal from the WV-CP610 and WV-BP510 series camera.
WV-RM70 Specification
Power Source : | DC12V (DC 10.8V - 16.0V), 230mA | |
Camera Input : |
Composite Video Signal: 1.0Vp-p / 75Ω VD2 Output Signal: 2.5Vp-p / 75Ω Data Signal: 0.5Vp-p / 75Ω |
|
Video Output : |
Composite Video Signal: 1.0Vp-p / 75Ω VD2 Input Signal: more than 1.5Vp-p / 75Ω (Mode Selection Switch is set at SYSTEM) Data Signal: 0.5Vp-p / 75Ω (Mode Selection Switch is set at SYSTEM) |
|
Alarm Output : | Open collector output : 16V DC, 100mA max. | |
Alarm Reset Output : |
Pulse (VTR) : +5V DC 500msec. or Open collector output : 16V DC, 100mA max. |
|
Data Input / Output : | RS-485 | |
Remote Control Functions | ||
Camera Set Up : | For Panasonic WV-CP610 or WV-BP510 series camera | |
Camera Functions : |
Electronic Sensitivity Up Mode Select : Auto / Manual / Off Electronic Shutter : On / Off, Shutter Speed Select Back Light Compensation : Auto / Preset/Off Automatic Gain Control : On / Off White Balance : ATW / AWC |
|
Lens Functions : |
Iris : Open / Close / Preset Focus : Near / Far Zoom : Tele / Wide |
|
Housing : | Wiper : On / Off, Defroster : On / Off | |
Pan / Tilt : |
Manual Pan : Right / Left, Manual Tilt : Up / Down Auto Pan : On / Off, Random Pan : On / Off |
|
Auxiliary Switch : | Aux 1-2 : On / Off | |
Ambient Operating Temperature | 14°F - 140°F (−10°C - +60°C) | |
Ambient Operating Humidity : | Less than 90% | |
Dimensions : |
5-7/16” (W) x 7-5/16” (D) x 2”(H) 138 (W) x 185 (D) x 51 (H) mm |
|
Weight : | 1.8 lbs. (0.8 kg) |