Details
Watec 1/2.8” HD-TVI Camera
WAT-2300 Key Features
▪ | Full HD CMOS sensor |
▪ | 1/2.8-inch 2M CMOS image sensor with high sensitivity |
▪ | Min. illumination 0.1 lx F1.2 |
▪ | Digital interface HD-TVI without latency and degradation, HD resolution of 1080p30 Full HD |
▪ | Long distance transmission without boost (3C-2V:150m, 5C-2V:300m) |
▪ | Existing infrastructure doesn't need to be replaced, just change their old analogue cameras and DVRs to TVI cameras and DVRs to get a brand new 1080p surveillance system without extra cost |
▪ | OSD (On screen display) – Easy installation through a controller provided in kit |
WAT-2300 Description
This is our high quality solution to the TVI output requests. The new 2300 is miniature in size abundant in features! The TVI format affords you the ability to make longer video cable runs, making it a drop in replacement to those installations where you previously had a low resolution camera set. Fully adjustable via our RC-01 (remote control), the OSD menu tree offers the ability to make necessary function changes as you require.
WAT-2300 Specifications
Pick-up element | 1/2.8-inch CMOS image sensor |
Number of total pixels | 1952(H) × 1236(V) |
Number of effective pixels | 1080i/1080p: 1920(H) × 1080(V) / 720p: 1280(H) × 720(V) |
Unit cell size | 2.8μm × 2.8μm |
Imaging system | RGB+W array mosaic filters on chip |
Synchronizing system | Internal |
Scanning System | Progressive |
Video Output | HD-TVI |
Output format | 1080/30p, 1080/25p, 720/60p, 720/50p, 720/30p, 720/25p |
Minimum Illumination | 0.1 lx F1.2 |
S/N | More than 50dB |
Function settings | OSD (On Screen Display) / RS-232, Remote controller |
AE mode | E.I+AGC, AGC, FL, MANUAL |
Shutter speed | OFF, FL, 1/200, 1/500, 1/1000, 1/2000, 1/5000, 1/10000 sec. |
Flickerless mode | AUTO, 50Hz, 60Hz, OFF |
White balance | ATW, PWB, Preset, MANUAL |
AGC | HIGH, MEDIUM, LOW |
MGC | 0 - 30dB |
Gamma characteristics | ON / OFF |
Noise reduction | HIGH, MEDIUM, LOW, OFF |
Wide dynamic range | ON (ATR) / OFF |
Lens iris | DC |
Back light compensation | ON / OFF |
White blemish correction | Max. 1023 dots |
Defog | ON / OFF |
Mirror image | ON (H-FLIP, V-FLIP, ROTATE) / OFF |
Power supply | DC+12V±10% |
Power consumption | 1.92W/160mA (720p60) |
Operating temperature | -10 - +50℃ |
Storage temperature | -30 - +70℃ |
Operating / Storage humidity | 95% RH or less (Without condensation) |
Lens mount | CS mount (Back focus adjustable) |
Weight | Approx. 130g |
Accessories | WPDC12-R (DC plug), Hex. wrench, RC-02 (Remote controller), Tripod adaptor |