Details
Bosch DINION HD 1080p HDR Camera
NBN-932V-IP Key Features
- High Dynamic Range to see details in bright and dark areas simultaneously
- Intelligent noise reduction reduces bandwidth and storage requirements by up to 30%
- Auto back focus for fast installation
- Content-based scene analysis optimizes the image processing
NBN-932V-IP Description
The high dynamic range DINION HD 1080p camera combines intelligence with adaptive video processing to bring you high performance content-based imaging in any security or surveillance scenario, day or night. The camera uses an internal feedback system based on the intelligent analysis of the scene, to re-tune the video processing. This provides better detail in the areas that matter and better all-round performance.
NBN-932V-IP Functions
High Dynamic Range
The High Dynamic Range (HDR) of the camera means that you can view details
in the bright and the dark areas of a scene at the same time. HDR is based on a
dual exposure process that captures more details in highlights and shadows even
under challenging lighting conditions. The result is that you can distinguish
objects and features easily.
Content-Based Imaging Technology
Content-Based Image Technology (C-BIT) is used to radically improve image
quality in all lighting conditions and to identify areas for enhanced
processing. The camera examines the scene using intelligent video analytics and
provides feedback to retune the image processing. This provides better detail in
the areas that matter and better all-round performance. The intelligent
Automatic Exposure (iAE) technology, for example, allows you to view moving
objects in bright and dark areas of a scene.
Low bandwidth consumption
The intelligent Dynamic Noise Reduction (iDNR) actively analyzes the contents of
the scene to reduce bandwidth and storage requirements. This removes noise
artefacts so effectively that compression efficiency is very high (up to 30%
improvement). This results in reduced-bandwidth streams that still retain a high
image quality and smooth motion. The camera provides the most usable image
possible by cleverly optimizing the detail-to-bandwidth ratio via temporal and
spatial noise filtering.
Compression parameters for up to eight user-definable regions can be set. This
allows uninteresting regions to be highly compressed, thus lowering bandwidth
consumption and storage requirements. Important regions can be tuned for best
image quality, thus allowing the user to allocate bandwidth to important parts
of the scene.
Simple installation
The camera has a very intuitive user interface that allows fast and easy
configuration. Six configurable user modes are provided with the best settings
for a variety of applications:
• Outdoor – general day-to-night changes with sun highlights and street
lighting
• Indoor – general day-to-night changes without sun highlights and street
lighting
• Motion – monitoring traffic or fast moving objects; motion artefacts are
minimized
• Lowlight – optimized for sufficient details at low light.
• Intelligent AE – for people moving in front of a bright background.
• Vibrant – enhanced contrast, sharpness and saturation
The auto-focus lens wizard makes it easy for an installer to accurately focus
the camera for both day and night operation. The wizard is activated from the
web browser or from the on-board camera push button making it easy to choose the
workflow that suits best. The automatic motorized back focus adjustment with 1:1
pixel mapping ensures the camera is always focused accurately.
Streams
The innovative multi-streaming feature delivers various H.264 streams together
with an M‑JPEG stream. These streams facilitate bandwidth-efficient viewing and
recording as well as integration with third-party video management systems.
An upright mode can be selected for the second stream. In this mode an image of
400 x 720 (9:16 aspect ratio) is cropped from the full sensor image. When the
scene to be monitored is suitable to this mode, the bandwidth and storage
requirements are reduced.
Storage management
Recording management can be controlled by the Bosch Video Recording Manager
(VRM) or the camera can use iSCSI targets directly without any recording
software.
Edge recording
The internal MicroSD card slot supports up to 2 TB of storage capacity. A
microSD card can be used for local alarm recording. Pre-alarm recording in RAM
reduces recording bandwidth on the network, or — if microSD card recording is
used — extends the effective life of the storage medium.
Intelligent Video Analytics
The camera uses the latest generation of the Bosch Intelligent Video Analysis
(IVA) software. This IVA system is the guard-assistant system of choice when
reliable indoor or outdoor video analytics is needed. The state-of-the-art
system reliably detects, tracks, and analyzes moving objects while suppressing
unwanted alarms from spurious sources in the image. The face detection feature
detects faces in the scene and forwards a high quality JPEG image of the best
shot of each face when the face disappears from the scene.
Retrospective forensic search capabilities are available remotely from the web
browser or the Bosch Video Client.
Regions of interest
Two Regions of Interest (ROI) can be user defined. The remote electronic pan,
tilt and zoom controls allow you to select specific areas of the parent image.
These regions produce separate streams for remote viewing and recording. These
streams, together with the main stream, allow the operator to separately monitor
the most interesting part of a scene while still retaining situational
awareness.
The IVA Intelligent tracker can also follow objects within the defined regions
of interest. The Intelligent tracker can autonomously detect and track moving
objects or the user can click on an object which the Intelligent tracker will
then follow.
Access Security
Password protection with three levels and 802.1x authentication is supported. To
secure Web browser access, use HTTPS with a SSL certificate stored in the
camera. The video and audio communication channels can be independently AES
encrypted with 128-bit keys by installing the optional encryption site license.
Surveillance software
There are many ways to access the camera’s video and IVA-based features: using a
web browser, with the Bosch Video Management System, with the Bosch Recording
System, with the free-of-charge Bosch Video Client, or with the video security
mobile App. The Bosch Video Client PC surveillance software offers a
user-friendly interface to support easy installation and configuration. It also
provides easy live viewing of multiple cameras, playback, forensic search and
export.
Access to IVA metadata is available to integrators via RTSP.
Video security App
The Bosch video security mobile App has been developed to enable Anywhere access
to HD surveillance images allowing you to view live images from any location.
The App is designed to give you complete control of all your cameras, from
panning and tilting to zoom and focus functions. It’s like taking your control
room with you.
This App, together with the separately available Bosch transcoder, will allow
you to fully utilize our dynamic transcoding features so you can play back
images even over low-bandwidth connections.
Connections
The camera conforms to the ONVIF (Open Network Video Interface Forum) Profile S
specification which guarantees interoperability between network video products
regardless of manufacturer. For trouble-free network cabling, the camera
supports Auto-MDIX which allows the use of straight or cross-over cables. Camera
power is supplied via PoE (Power-over-Ethernet) or via the 24 VAC/12 VDC
connector.
Third-party integrators can easily access the internal feature set of the
camera for integration into large projects.
Some typical applications
• Tunnels – viewing details in bright and dark areas
• Entrances and exits – identification with strong backlight
• Traffic – capturing moving vehicles at night
Lens Optional