space
      space
space

Sovereign International CCTV Distributor of Panasonic, Bosch, Samsung


              Group Est. 1966

UK Sales
  UK Sales
 
Exports Worldwide CCTV Distribution/Wholesale to the Trade space Samsung Hanwha Techwin, Videotec, Fujinon, Bosch, Watec
 

Shop and Buy Panasonic Authorised UK Distributor

   Authorised UK Distributors

space
space
 

 

Bosch NXF9130A4 Extegra IP Starlight 9000 FX Camera

OR
Model No.: Bosch NXF-9130-A4

Quick Overview

EXTEGRA IP starlight 9000 FX Explosion-protected, fixed camera system with exceptional low-light imaging. 720p50/60 HD resolution, integrated 30x optical zoom lens, IVA, PoE, and easy installation for explosive environments. Aluminum housing.

Bosch NXF9130A4 Extegra IP Starlight 9000 FX Camera

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Bosch Security Systems Products


Bosch Extegra IP Starlight 9000 FX Camera

 

Extegra IP Starlight 9000 FX Series Key Features

 

High-performance camera with highly sensitive starlight 720p50/60 HD resolution in an explosionproof housing of either anodized aluminum or ruggedized, electropolished 316L stainless steel.
All models hold international certifications for use in hazardous environments.
Easy one-piece installation with a motorized zoom lens and autofocus mechanism.
Optional integrated Ethernet or Fiber Optics provides versatility for longer cable runs or where electromagnetic interference is a concern.
ONVIF conformant; provides interoperability with other conformant systems.

 

Extegra IP Starlight 9000 FX Series  Description

 

The EXTEGRA IP starlight 9000 FX is a highperformance, smart surveillance, fixed camera system for explosive environments. The professional-grade imaging platform uses the latest technology in intelligent imaging and video streaming and is capable of delivering 720p50/60 HD resolution in environments with extreme ambient challenges.


The camera holds all major international explosionprotected certifications for safe use in almost any region of the world. In addition, the camera complies to industry standards such as Type 6P and IP68 ratings.


The camera gives you the confidence to ensure a safe workplace while maintaining image quality in the world’s most volatile locations.


Extegra IP Starlight 9000 FX Series Functions


Exceptional low-light performance



The latest sensor technology, combined with sophisticated noise suppression, results in a sensitivity of 0.052 lx at 720p50/60 HD resolution. The low-light performance exceeds expectations by providing excellent color performance even with a minimum of ambient light.


Integrated Zoom lens series and Auto Focus



EXTEGRA IP 9000 has a 30x optical Zoom lens (12x digital zoom) and an Auto Focus mechanism that allows installers to change the camera’s field of view (FOV) remotely without needing to make lens adjustments manually in the field. All lens configurations are possible from the head end system. When the Auto Focus feature is selected in the camera’s configuration, the camera continuously adjusts the lens to the correct image focus.


Intelligent Defog



With the Intelligent Defog mode feature, visibility can be improved significantly when viewing foggy or other low-contrast scenes.


Users can configure the mode to be active continuously, or to activate automatically when the video analytics in the camera detect fog and add light to the video image (and then deactivate when the fog clears or the scene changes).


Sodium vapor lamp white balance



The camera is an exceptional performer when capturing video under a sodium vapor lamp (a street lamp or tunnel lamp, for example). Images under these conditions may have a yellowish tint, which can make identification difficult. In the Sodium Vapor White Balance mode, the camera automatically compensates for the light from a sodium vapor lamp to restore objects to their original color.


Five (5) pre-programmed user modes



Five pre-programmed but configurable user modes, optimized with the best settings for a variety of typical applications, make on-site programming easy and userfriendly. Users select from the menu the mode that best defines the environment in which the camera is installed:


• Outdoor – General day-to-night changes with sun highlights and street lighting
• Indoor – Ideal mode for indoor applications where lighting is constant and not changing
• Low light – Optimized for sufficient details at low light
• Motion – Monitoring traffic or fast moving objects; motion artifacts are minimized
• Vibrant – Enhanced contrast color reproduction and sharpness


Users have the ability to customize these modes, if necessary, for the specific requirements of the site.


Sophisticated alarm responses



The camera supports advanced alarm control that uses sophisticated rules-based logic to determine how to manage alarms. In its most basic form, a “rule” could define which input(s) should activate which output(s). In a more complex form, inputs and outputs can be combined with pre-defined or user-specified commands to perform advanced camera functions.


Intelligent Dynamic Noise Reduction reduces bandwidth and storage requirements



The camera uses Intelligent Dynamic Noise Reduction which actively analyzes the contents of a scene and reduces noise artifacts accordingly.


The low-noise image and the efficient H.264 compression technology provide clear images while reducing bandwidth and storage by up to 50% compared to other H.264 cameras. This results in reduced-bandwidth streams that still retain a high image quality and smooth motion. The camera provides the most usable image possible by cleverly optimizing the detail-to-bandwidth ratio.


Content Based Imaging Technology



Content Based Imaging Technology (CBIT) is used to radically improve image quality in all lighting conditions and to identify areas for enhanced processing. The camera examines the scene using intelligent video analytics and provides feedback to retune the image processing. This provides better detail in the areas that matter and better all-round performance.


Advanced streaming



The camera offers advanced streaming capabilities so that you can configure the camera to take advantage of the latest network technology.


The camera is designed on the most efficient and powerful H.264 encoding platform capable of delivering high-quality HD video with very low network load. The new intelligent encoding capabilities drops the bandwidth consumption to extremely low levels if the camera detects no motion in the scene.


The camera is capable of quad streaming which allows the camera to be configured to deliver independent, configurable streams for live viewing, recording, or remote monitoring on constrained bandwidths.


Intelligence



With built-in Intelligent Video Analysis (IVA), the camera reinforces the concept of Intelligence at the Edge. IVA is Bosch’s state-of-the-art intelligent video content analysis technology. With IVA, the camera reliably detects and analyzes moving objects while suppressing unwanted alarms from spurious sources in the image. IVA also allows the camera to detect multiple object behaviors including idle and removed objects, loitering, multiple line crossing, and trajectories. IVA supports BEV (Bird’s-Eye-View) People Counter and Assisted Self-Calibration. Configurable detection filters improve reliability and reduce operator work load.


Advanced networking capabilities



The camera offers Quality of Service (QoS) configuration options to ensure fast network response to camera data and images. Quality of Service (QoS) is the set of techniques to manage network resources. QoS manages the delay, delay variation (jitter), bandwidth, and packet loss parameters to guarantee the ability of a network to deliver predictable results. QoS identifies the type of data in a data packet and divides the packets into traffic classes that can be prioritized for forwarding.


The camera also supports the IPv6 internet-layer protocol for packet-switched internetworking across multiple IP networks. IPv6 uses 128-bit addresses (IPv4 uses 32-bit addressing), which allows for many more devices and users on the network as well as extra flexibility in allocating addresses and efficiency for routing traffic.


The camera maximizes your security investment by integrating with Bosch video products including Bosch Video Client, Bosch Video Management System, and the Bosch Recording Station, as well as the full range of Bosch video-over-IP products.


ONVIF conformant



The camera conforms to the ONVIF (Open Network Video Interface Forum) specification which guarantees interoperability between network video products regardless of manufacturer. The ONVIF Profile S specification allows easy integration with other conformant devices and VMS. ONVIF conformant devices are able to exchange live video, audio, metadata, and control information, and ensure that they are automatically discovered and connected to network applications such as video management systems.


Dual power options



The camera can be powered by a network compliant to High Power-over-Ethernet (Bosch’s version of High PoE) using a Bosch model of High PoE Midspans (sold separately). With this configuration, only a single (Cat5e/Cat6e) cable connection is required to view, to power, and to control the camera.


The camera can also accept a standard 24 VAC power source if a High PoE network interface will not be used. User-supplied wiring must be in compliance with electrical codes (Class 2 power levels).


For maximum reliability, the camera can be connected simultaneously to a High PoE Midspan and a separate 24 VAC power source. If High PoE and 24 VAC are applied simultaneously, the camera usually selects auxiliary input (24 VAC) and will draw minimal power from the High PoE Midspan. If the 24 VAC power source fails, the camera switches power input seamlessly to High PoE. After the 24 VAC power source is restored, the camera switches power input again to 24 VAC.


Refer to the table in the Installation/configuration notes section for more information.


Global explosion protection certification



The camera holds all major international certifications for installation of explosion-protected products. As a UL-listed product, the camera is certified for the division and zone system per the NEC standards. For Europe, it has ATEX certification. The camera has been tested against and conforms to the international IECEx scheme. For Brazil, the camera holds the INMETRO certification.


Extreme environment ready



The camera is available with an explosion-proof housing of either anodized aluminum (for less corrosive environments) or ruggedized, electropolished 316L stainless steel (which offers excellent corrosion protection in highly corrosive environments).


Subjected and certified to rigorous immersion tests, the camera has Type 6P and IP68 ratings for wet locations.


As with all Bosch products, the camera is designed using the industry’s best design process and is subjected to the most stringent testing standards such as HALT (highly accelerated life testing), which pushes the limits of products to ensure reliability throughout their lifetime.


For operation in areas prone to vibration, the camera has been tested to the IEC 60068 standards applicable to vibration and shock.


Ease of installation and servicing



A single pre-assembled unit with an integrated junction box, the camera is designed to be easy to install. Four 3/4‑in. conduit openings provide access to the convenient terminal block for all power, alarm, and Ethernet cable connections. (An M20 adapter is also included.) The optional fiber optic module, accessible through the junction box, provides versatility for longer cable runs or where electromagnetic interference is a concern.


Various mounting options with the mount adapter



The EXS-ADPT is a stainless steel mount adapter that allows installers to mount an EXTEGRA IP 9000/EX65 device to a MIC wall mount bracket (MIC-WMB) and then to one of the following mounting brackets originally designed for the MIC Series of cameras:


• Spreader plate (MIC-SPR), for installation on a wall
• Corner mount bracket (MIC-CMB), for installation in a corner
• Pole mount bracket (MIC-PMB), for installation on the side of a CCTV pole

 

Extegra IP Starlight 9000 FX HD Series Specification

 

Imager 1/3-type Exmor CMOS sensor
Effective Picture Elements (Pixels) 1305 x 1049 (1.37 MP)
Lens 30x Zoom4.3 mm to 129 mmF1.6 to F4.7
Field of View (FOV) 2.1° to 59°
Focus Automatic with manual override
Iris Automatic with manual override
Digital Zoom 12x
Sensitivity / Minimum Illumination (typical) 30 IRE , 50 IRE
Day Mode (Color)  
Fixed shutter 1/30, High Sensitivity mode On 0.052 lux , 0.166 lux
Fixed shutter 1/30, High Sensitivity mode Off 0.26 lux , 0.66 lux
SensUp On (max. ¼), High Sensitivity mode On 0.0082 lux , 0.033 lux
Night Mode (Black and white)  
Fixed shutter 1/30, High Sensitivity mode On 0.0103 lux , 0.041 lux
Fixed shutter 1/4, High Sensitivity mode On 0.00129 lux , ---
SensUp On (max. ¼), High Sensitivity mode On 0.00065 lux , 0.00205 lux
   
Gain Control Auto/Manual/Max
Aperture Correction Horizontal and vertical
Electronic Shutter Speed (AES) 1/1 sec to 1/10000 sec (22 steps)
Dynamic Range 90 dB typical
Signal-to-Noise Ratio (SNR) >50 dB
Backlight Compensation (BLC) On/Off
White Balance 2000 K to 10,000 K ATW, AWB Hold, Extended ATW, Manual, Sodium Lamp Auto, Sodium Lamp
Day/Night Monochrome, Color, Auto
Defog mode feature Improves visibility when viewing foggy or other low-contrast scenes.
   
Input Voltage 24 VAC ± 10%, 50/60 HzorSingle Ethernet High PoE cable connection
Power Consumption 18W / 28VA (no heaters)68W / 85VA (with 24VAC and heaters ON)48W / 50VA (with High PoE and heaters ON)
Protection on Alarm Inputs Peak current 17 A, peak power 300 W (8/20 μs)
Protection on Alarm Outputs Peak current 2 A, peak power 300 W (8/20 μs)
Protection on Relay Output Peak current 7.3 A, peak power 600 W (10/1000 μs)
Protection on Power Input Peak current 7.3 A, peak power 600 W (10/1000 μs)
10/100 EthernetData Lines Peak current 14 A, peak power 200 W (8/20 μs)
   
Camera Setup/Control Via Internet Explorer web browser version 7.0 or later, Bosch Configuration Manager, Bosch Video Management System (BVMS), Bosch Video Client (BVC), or support for third party software
Software Update Network firmware upload
   
Standards / Video compression H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG
Streaming Four (4) individually configurable streams in H.264 and M-JPEG, configurable frame rate and bandwidth:
Two independently configurable H.264 streams Stream 1: H.264 Main Profile (MP): 91xx models: 720p50/60 92xx models: 1080p25/30 Stream 2: H.264 Baseline Profile plus (BP+)orH.264 MP Standard Definition (SD)or Copy of Stream 1
Two additional streams M-JPEG streamandHigh Definition (HD) I-frame only stream
Resolution (H x V)  
720p HD 1280 x 720
432p SD 768 x 432
288p SD 512 x 288
144p SD 256 x 144
Network  
Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, APIPA (Auto-IP, link local address), NTP (SNTP), SNMP (V1, MIB-II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication
Encryption TLS 1.0, SSL, DES, 3DES
Ethernet 10/100 Base-T, auto-sensing, half/full duplex
Connectivity ONVIF Profile S , Auto-MDIX
Ethernet Connector RJ45
GOP Structure IP, IBP, IBBP
Data Rate 9.6 kbps to 6 Mbps
Overall IP Delay 240 ms
Audio  
- Standard G.711, 8 kHz sampling rateL16, 16 kHz sampling rateAAC, 16 kHz sampling rate
- Signal-to-Noise Ratio >50 dB
- Audio Streaming Bidirectional (full-duplex)
   
Memory Card Slot User-supplied SD/SDHC/SDXC memory card (maximum 2TB – SDXC)
Recording Continuous recording of video and audio, alarm/events/schedule recording
   
Preset Zoom Positions 256
Camera Setup / Control 100 Base Tx Ethernet
Supported Languages English, Czech, Dutch, French, German, Italian, Polish, Portuguese, Russian, Spanish
   
Power, Network 10/100 Base-T, auto-sensing, half/full duplex
Power, Camera 24 VAC (power supply)
Video and Control RJ-45 100 Base-TX Ethernet
Alarm Inputs Three (3) non-supervised Programmable for “normally open” or "normally closed”
Alarm Outputs Two (2) open collector/transistor outputs 32 VDC @ 150 ma max. 1 dry contact relay
Audio 1 x mono line in, 1 x mono line out
Signal line in 12 kOhm typical, 1 Vrms max
Signal line out 1 Vrms at 1.5 kOhm, typical
   
Ingress Protection Rating IP68
UL Type Rating Type 4X, Type 6
Operating Temperature Aluminum models, 24VAC: -50 °C to +60 °C(-58 °F to +140 °F)Aluminum models, PoE:-40 °C to +60 °C(-40 °F to +140 °F)Stainless Steel models, 24VAC: -50 ⁰C to +55 ⁰C (-58 ⁰F to +131 ⁰F)Stainless Steel models, PoE: -40 ⁰C to +55 ⁰C (40 ⁰F to +131 ⁰F)
Storage Temperature -55 °C to +70 °C (-67 °F to +158 °F)
Operating Humidity 0 to 100% relative (condensing, after installed and sealed)
Storage Humidity 20 to 98% relative (non-condensing)
   
Dimensions(L x W x H) 381 x 114 x 114 mm(11.01 x 4.5 x 4.5 in.) without sunshield or mounting cradle
Weight Stainless Steel: 12.9 kg (28.5 lb)Aluminum: 6.4 kg (14 lb)
Construction Material Electropolished 316L Stainless Steelor Anodized Aluminum
Bracket Pan(±36°)/Tilt(±45°),mounting cradle included
View Window 9-mm thick borosilicate float glass
Cable Entry Four (4) 3/4-in. NPT entries; Thread Adapter (3/4 in. NPT to M20) included


 

 

Extegra IP Starlight 9000 FX HD Series Ordering information
 

Product Code Description
NXF-9130-A4 EXTEGRA IP starlight 9000 FX Explosion-protected, fixed camera system with exceptional low-light imaging. 720p50/60 HD resolution, integrated 30x optical zoom lens, IVA, PoE, and easy installation for explosive environments. Aluminum housing.
NXF-9130-S4 EXTEGRA IP starlight 9000 FX Explosion-protected, fixed camera system with exceptional low-light imaging. 720p50/60 HD resolution, integrated 30x optical zoom lens, IVA, PoE, and easy installation for explosive environments. Stainless steel housing.