Details
Bosch UHO PoE Outdoor Camera Housing
UHO-POE-10 Key Features
• | Protects camera/lens combinations up to 268 mm (10.6 inch) in length |
• | Stylish and sturdy housing (IP67; NEMA 4x) |
• | PoE power input for single cable installation |
• | Heater and window defroster |
• | Hinged side opening for easy installation and camera setup |
UHO-POE-10 Description
The PoE camera housing is a smartly styled enclosure that enables you to use a
DINION camera in an outdoor or indoor environment, or in areas where the camera
needs to be protected.
This housing is supplied with power via the PoE Ethernet connection or,
alternatively, via a separate a 12 VDC power supply.
UHO-POE-10 System overview
Secure
The sturdy housing design meets IP67 and NEMA 4X standards to protect your video
surveillance equipment from adverse elements. A built-in heater and fan keep the
internal temperature of the housing within the specified operating temperatures,
and also keep the housing window clear in high humidity and icy conditions. A
sunshield is fitted to the top of the housing.
UHO-POE-10 Functions
Easily installed
The unique, hinged, side-opening design in the housing provides easy access to
the camera/lens controls when mounting. Tamper-resistant screws for the locking
clasps prevent unauthorized access to the housing. Mounting holes on the base of
the housing allow maximum mounting flexibility to fixed, swivel and tilt head
bracket mounts.
Rugged
With a sleek design that meets IP67 and NEMA-4X standards, the PoE housing is
the ideal solution for protecting your video surveillance equipment from adverse
elements.
Connections
A single cable gland (M25 x 1.5) in the foot of the housing allows a seal-tight
connection for Ethernet (PoE) power, and optionally, 12 VDC and alarm or audio
cables. The housing and camera are powered via a PoE Ethernet cable or, in the
absence of PoE, via an external 12 VDC power supply routed through the housing
power supply.
UHO-POE-10 Specification
Dimensions (H x W x L) | 141 x 164 x 430 mm (5.6 x 6.5 x 16.9 in.) including sunshield |
Weight | 2.2 kg (4.9 lb) |
Construction | Aluminum casing, silicone gaskets, all stainless steel hardware |
Color | Gray |
Window | 3 mm (0.12 in) glass |
Locking clasps | Tamper-resistant screws provided |
Camera mounting | Removable camera/lens tray, mounted with two screws |
Max. camera + lens size (H x W x L) | 70 x 80 x 268 mm (2.8 x 3.2 x 10.6 in) |
Mounting holes | 2x pair of 1/4-20 tapped holes inner pair: 51 mm (2.0 in) center-to-center outer pair: 74 mm (2.9 in) center-to-center |
Power supply | Power-over-Ethernet Plus (PoE+) IEEE 802.3at, 48 VDC nominal; or 12 VDC (switchable) |
Power consumption (housing only) | 14 W max. |
Power handling (housing + camera) | 30 W max. |
Operating temperature - external | -30 °C to +50 °C (‑22 °F to +122 °F) |
Operating temperature – internal1 | -20 °C to +50 °C (‑4 °F to +122 °F) |
Enclosure protection2 | IP67, NEMA-4X |
NEMA TS 2-2003 (R2008), para 2.1.5.1 using fig. 2.1 test profile | -34 ºC to +74 ºC (-30 ºF to +165 ºF) |