Details
Bosch Autodome IP 7000 HD Dome Camera
Autodome IP 7000 HD Key Features
• | High-resolution, full HD PTZ camera with 1080p25/30 (2MP) resolution and 20x zoom |
• | Intelligent Tracking and alarm rules engine with onboard Intelligent Video Analytics (IVA) |
• | Enhanced system flexibility with dual recording options (iSCSI, SD card) and dual power source options (High Power over Ethernet (High PoE) / 24 VAC) |
• | Fully configurable quad streaming with individually configurable HD streams, based on Bosch’s Common Product Platform (CPP4) |
• | Easy and intuitive installation with multiple preconfigured user modes that allow users to select the camera configuration that is ideal for their applications |
The AUTODOME 7000 HD is an easy to install, highspeed PTZ dome camera, in a
field-proven indoor/ outdoor pendant housing or indoor in-ceiling housing, that
delivers unmatched picture quality and network performance day and night with
superb high-definition (HD) 1080p25/30 (2MP) video and 20x optical zoom. The
camera provides complete network-based control of all dome functionality
including pan/tilt/zoom operation, presets, tours and alarms as well as webbased
configuration of all dome settings. It also provides direct network video
streaming using H.264 compression / bandwidth throttling to efficiently manage
bandwidth and storage requirements while delivering outstanding image quality.
Autodome
IP 7000 Functions
High-performance PTZ day/night camera
The camera has a large, effective sensor area that contributes to very high
camera sensitivity. The camera can be configured to operate in 720p50/60 mode
for capturing fast motion (for example, in traffic or gaming scenarios). The
default 1080p25/30 mode
delivers high resolution images with six times more
details than a standard definition (SD) camera.
Intelligent Defog
Users can configure the mode to activate automatically when the global contrast
enhancement method in the camera detects fog and adds light to the video image
(and then deactivates when the fog clears or the scene changes).
Sodium vapor lamp white balance
The camera is an exceptional performer when capturing video under a sodium vapor
lamp (a street lamp or tunnel lamp, for example). Uncorrected images under these
conditions have a yellowish tint, which can make identification difficult. In
the Sodium Vapor White Balance mode, the camera automatically compensates for
the light from a sodium vapor lamp to restore objects to their original color.
Virtual masking
The camera offers Virtual Masking, which gives users flexibility to mask parts
of the scene which should not be considered for flow analysis to trigger
Intelligent Tracking. This allows users to mask from IVA/Tracking any background
motion (moving trees, pulsating lights, and busy roads) in the scene without
blocking the motion from the video.
Intelligent Tracking
The camera utilizes the built-in Intelligent Video Analytics (IVA) to follow an
individual or an object continuously. Objects detected by IVA when the camera is
in a stationary position activate the Intelligent Tracking feature, which
controls the pan/ tilt/zoom actions of the camera to keep the tracked object in
the scene.
The new Intelligent Tracking is based on robust flow detection algorithms which
can reliably track moving objects even under challenging scenes. The tracking
and detection reliability can be enhanced further with virtual masking for
scenes with a lot of background motion such as trees or other objects creating
constant motion in the scene. The camera supports three modes for Intelligent
Tracking:
Auto mode: When configured in this mode, the camera actively analyzes the video
to detect any moving object. If it detects movement, it begins to track the
object. This mode is most useful for scenarios where normally no motion is
expected.
One Click mode: In this mode, users can click an object moving in the live video
image to enable the camera to track the movement of the selected object. This
mode is most useful for scenarios where normal scene activity is expected.
IVA-triggered mode: In this mode, the camera continuously analyzes the scene for
IVA alarms or IVA rule violations. If an IVA rule is violated, it triggers the
advanced tracking feature of the camera to start following the object / person
that triggered the alarm. This unique combination of robust IVA and Intelligent
Tracking allows the camera to track moving objects of interest without getting
distracted by other moving objects in the scene.
Intelligence
With built-in video content analysis, the AUTODOME reinforces the
Intelligence-at-the-Edge concept where edge devices become increasingly
intelligent. The AUTODOME comes with Bosch’s Intelligent Video Analysis (IVA)
built-in. IVA is state-of-the-art intelligent video analysis that reliably
detects, and analyzes moving objects while suppressing unwanted alarms from
spurious sources in the image.
The IVA functionality built into the AUTODOME is able to detect idle and removed
objects as well as loitering, multiple line crossing, and trajectories. IVA also
supports BEV (Bird’s Eye View) People counting.
Assisted Self Calibration and configurable detection filters improve reliability
and reduce operator work load.
PTZ drive and mechanism
The AUTODOME 7000 supports 256 pre-positions and two styles of Guard Tours:
Preset and Record/ Playback. Users can configure the preset standard tour with
as many as 256 sequential pre-positions, with a configurable dwell time between
pre-positions. The AUTODOME Series also provides support for two recorded tours,
which are recorded macros of an operator’s movements, including pan, tilt, and
zoom activities, and can be played back with the click of a button.
Pan and tilt preset repeatability are accurate to within ±0.1 degrees to ensure
that the correct scene is captured every time. The camera delivers variable pan/
tilt speeds from a crawl speed of only 0.1 degrees per second to a full 400
degrees per second. The camera is capable of pan speeds of 400 degrees per
second and tilt speeds of 300 degrees per second between prepositions. The
camera provides a tilt angle 18 degrees above the horizon, and a pan range of up
to 360 degrees continuous rotation.
Five (5) pre-programmed user modes
Five pre-programmed but configurable user modes, optimized with the best
settings for a variety of typical applications, make camera programming on-site
easy and user-friendly. Users select from the menu the mode that best defines
the environment in which the camera is installed:
• | Outdoor – general day-to-night changes with sun highlights and street lighting |
• | Indoor – general day-to-night changes without sun highlights and street lighting |
• | Low light –optimized for sufficient details at low light |
• | Motion – monitoring traffic or fast moving objects; motion artifacts are minimized |
• | Vibrant – enhanced contrast color reproduction and sharpness |
Users have the ability to customize these modes, if necessary, for the specific
requirements of the site. Superior privacy masking
The camera provides 24 individual, easy to configure privacy masks, with up to 8
displayed in the same scene. As the camera is zoomed, each mask changes size
smoothly and quickly, ensuring that the covered object cannot be seen in most
cases.
Comprehensive streaming capabilities on Bosch’s Common Product Platform (CPP4)
The camera has an advanced, efficient H.264 encoder (CPP4) embedded for high
quality HD streaming video and very efficient streaming and network
capabilities. The new platform supports simultaneous streaming of individually
configurable HD streams, and allows a choice of HD resolution in combination of
SD resolutions.
Recording and storage management
A memory card (SD (Secure Digital), SDHC (Secure Digital High Capacity), or SDXC
(Secure Digital eXtended Capacity)) can be used for local alarm recording or for
scheduled local recording to improve the overall recording reliability.
Recording management can be controlled by the Bosch Video Recording Manager (VRM),
or the camera can use iSCSI targets directly without any recording software.
Dual power options
All models can be powered by a High Power-over-Ethernet (Bosch High PoE)-compliant
network using a Bosch High PoE Midspan (sold separately) over a single network
cable and/or a 24VAC power supply. Certain models can also be powered by any PoE+
Power Sourcing Equipment (PSE; midspan or switch) that is compliant to the IEEE
802.3at, class 4 standard and/or a 24 VAC power supply.
When powered using High PoE or PoE+ (IEEE 802.3at class 4) configuration, only a
single cable connection is required to power and to control the camera while
also viewing images from the camera. For additional system reliability, users
also have the option to connect the 24 VAC power supply to the camera while
using High PoE.
Video management system support
The camera ships with Bosch Video Client (BVC), an easy-to-use software from
Bosch that is suitable for midsize installations. For large enterprise systems,
AUTODOME cameras can be used with Bosch Video Management System (BVMS), which
allows enhanced video management and viewing capabilities.
In addition, the camera is supported/integrated into all of the leading third
party video management systems. ONVIF conformant
The AUTODOME Series conforms to the ONVIF Profile S specification allowing easy
integration with the conformant devices and VMS.
The camera conforms to the ONVIF (Open Network Video Interface Forum)
specification which guarantees interoperability between network video products
regardless of manufacturer. ONVIF conformant devices are able to exchange live
video, audio, metadata and control information. They are automatically
discovered and connected to network applications such as video management
systems.
Fiber Optic Kit
Bosch offers the optional VG4-SFPSCKT, a unique media converter module for use
with various Bosch devices. This media converter module is designed to accept a
wide-range of 10/100 Mbps SFP modules for use with Multimode or Single-mode
optical fiber with LC or SC connectors.
The media converter module along with the SFP module is user-installed directly
into the camera‘s power supply box to provide an integrated fiber optic
solution.
Access Security
Password protection with three levels and 802.1x authentication is supported. To
secure Web browser access, use HTTPS with a SSL certificate stored in the
camera.
Easy upgrade
Remotely upgrade the camera whenever new firmware becomes available. This
ensures up-to-date products, thus protecting investment with little effort.
Ease of installation and servicing
The camera has been designed for quick and easy installation; a key feature from
Bosch CCTV products. All housings feature recessed screws and latches for
increased tamper resistance.
Indoor/outdoor pendant housings are rated to provide IP66 protection and offer
an operating temperature range down to -40 °C (-40 °F). The indoor/outdoor
pendant comes fully assembled with a sunshield and ready for wall or pipe
applications with the proper mounting hardware (sold separately). In addition,
the camera models with both pendant and in-ceiling housing come equipped with a
low-impact, highresolution acrylic bubble for enhanced image clarity. You can
easily convert the outdoor pendant for indoor applications by removing the
sunshield. Bosch offers a full complement of hardware and accessories (sold
separately) for wall, corner, mast, roof, pipe mount, and in-ceiling
applications for indoor and outdoor environments, which allow the camera to be
adapted easily to individual site requirements.
Advanced networking capabilities
The AUTODOME offers advanced capabilities so you can configure the camera to
take advantage of the latest networking technology.
The AUTODOME offers Quality of Service (QoS) configuration options to ensure
fast network response to PTZ data and images. Quality of Service (QoS) is the
set of techniques to manage network resources. QoS manages the delay, delay
variation (jitter), bandwidth, and packet loss parameters to guarantee the
ability of a network to deliver predictable results. QoS identifies the type of
data in a data packet and divides the packets into traffic classes that can be
prioritized for forwarding.
The AUTODOME also supports the IPv6 internet-layer protocol for packet-switched
internetworking across multiple IP networks. IPv6 uses 128-bit addresses (IPv4
uses 32-bit addressing), which allows for many more devices and users on the
internet as well as extra flexibility in allocating addresses and efficiency for
routing traffic.
Autodome IP 7000 HD Specification
Imager | 1/2.8" progressive scan CMOS |
Total sensor pixels | 1945 x 1109 (2.16 M pixels) |
Effective pixels | 1080p: 1984 (H) x 1105 (V) (approximately 2.38M pixels)720p: 1344 (H) x 745 (V) |
Lens | 20x optical zoom4.7 mm (wide) to 94.0 mm (tele) (F 1.6 to F 3.5) |
Field of View | 59.5° (wide) to 3.3° (tele) |
Focus | Auto (Sensitivity: normal, low), One-push AF, Manual, Interval AF, Zoom Trigger AF, Focus compensation in ICR on |
Digital Zoom | 12x |
Sensitivity / Minimum Illumination (typical) | 30 IRE , 50 IRE |
Day Mode (Color) | |
Fixed shutter 1/30, High Sensitivity mode On | 0.06 lux , 0.2 lux |
Fixed shutter 1/30, High Sensitivity mode Off | 0.26 lux , 0.83 lux |
Fixed shutter ¼, High Sensitivity mode On | --- , 0.03 lux |
Night Mode (Black and white) | |
Fixed shutter 1/30, High Sensitivity mode On | 0.033 lux , 0.08 lux |
Fixed shutter ¼, High Sensitivity mode On | 0.0026 lux , --- |
Electronic Shutter Speed | 1/25 sec to 1/15,000 sec (12 steps) |
Signal-to-noise Ratio(SNR) | >50dB (AGC off) |
Noise Reduction | Intelligent Dynamic Noise Reduction |
Backlight Compensation (BLC) | On/Off |
Intelligent Defog | Intelligent Defog automatically adjusts parameters for best picture in foggy or misty scenes (switchable)" |
White Balance | Auto, ATW, Indoor, Outdoor, Outdoor Auto, Sodium Vapor Lamp (Fix/Auto/Outdoor Auto), One-push, Manual |
Day/Night | Mechanical switchable IR filter (Auto/On/off) Monochrome |
In-Ceiling | Pendant |
Pan Range | 360° cont. , 360° cont. |
Tilt Angle | 1° above horizon , 18° above horizon |
Pre-position Speed | Pan: 400°/sTilt: 300°/s , Pan: 400°/sTilt: 300°/s |
Pan/Tilt Modes | |
Turbo Mode(Manual Control) | Pan: 0.1°/s – 400°/sTilt: 0.1°/s – 300°/s |
Normal Mode | 0.1°/s-120°/s , 0.1°/s-120°/s |
Preset Accuracy | ± 0.1° typ. , ± 0.1° typ. |
In-Ceiling | Pendant |
Input Voltage | 21-30 VAC, 50/60 Hz; (class II) High PoE (with Bosch Midspan (NPD-6001A); required to power the heater) PoE+ (IEEE 802.3at, class 4 standard)(when used indoors, not powering the heater) |
Power Consumption,typical | 24 W / 44 VA , 60 W / 69 VA (heaters on)or24 W / 44 VA(heaters off / without heater connected in power supply box for indoor applications) |
Protection on Alarm Inputs | Peak current 17 A, peak power 300 W (8/20 μs) |
Protection on Alarm Outputs | Peak current 2 A, peak power 300 W (8/20 μs) |
Protection on Relay Output | Peak current 7.3 A, peak power 600 W (10/1000 μs) |
Protection on Power Input (Dome) | Peak current 7.3 A, peak power 600 W (10/1000 μs) |
Protection on PowerOutput (Arm Power Supply) | Peak current 21.4 A, peak power 1500 W (10/1000 μs) |
10/100 EthernetData Lines | Peak current 14 A, peak power 200 W (8/20 μs) |
Camera Setup/Control | Via web browser (such as Internet Explorer version 7.0 or later), Bosch Configuration Manager, Bosch Video Management System (BVMS), Bosch Recording Station (BRS), or Bosch Video Client (BVC) |
Software Update | Network firmware upload |
Video compression | H.264 (ISO/IEC 14496‑10), M‑JPEG |
Encoding / Streaming | |
H.264 | MJPEG |
Scenario | |
Stream 1 | Stream 2 , Stream 3 , Stream 4 |
1 | Full HD 1080p30 , Full HD 1080p5 , I-frameonly fromStream 1 , 1080p |
2 | Full HD 1080p30 , HD 720p10 , I-frameonly fromStream 1 , 1080p |
3 | Full HD 1080p30 , Downscaledstream , I-frameonly fromStream 1 , 1080p |
4 | Full HD 1080p30 , Copy of Stream 1 , I-frameonly fromStream 1 , 1080p |
5 | HD 720p60 , HD 720p8 , I-frameonly fromStream 1 , 720p |
6 | HD 720p30 , HD 720p30 , I-frameonly fromStream 1 , 720p |
7 | HD 720p30 , Downscaledstream , I-frameonly fromStream 1 , 720p |
8 | Downscaledstream , Downscaledstream , I-frameonly fromStream 1 , 1080p |
GOP Structure | IP, IBP, IBBP |
Data Rate (Range) | 9.6 kbps to 10 Mbps (per stream) |
Overall IP Delay | 240 ms |
Resolutions (H x V)) | |
HD Resolutions | |
1080p HD | 1920 x 1080 |
720p HD | 1280 x 720 |
Down-scaled SD streams | |
432p SD | 768 x 432 |
288p SD | 512 x 288 |
144p SD | 256 x 144 |
Corridor mode | 400 x 720 |
D1 4:3 cropped | 704 x 480 |
Ethernet | 10-Base T/100 Base-TX, auto-sensing, half/full duplex, RJ45 |
Protocols | IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, SNTP, SNMP (V1, MIB II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication |
Advanced Networking | IPv6, QoS |
Audio | |
Standard | G.711, 8 kHz sampling rateL16, 16 kHz sampling rateAAC, 16 kHz sampling rate |
Signal-to-Noise Ratio | >50 dB |
Audio Streaming | Bidirectional (full-duplex) |
Memory Card Slot | User-supplied SD/SDHC/SDXC memory card (maximum 2TB – SDXC) |
Recording | Continuous recording of video and audio, alarm/events/schedule recording |
VG4-SFPSCKT | |
Description | Fiber Optic Ethernet Media Converter kit 6.Requires a small form-factor pluggable (SFP) module (sold separately). |
Data Interface | Ethernet |
Data Rate | 10/100 MbpsIEEE 802.3 CompliantFull Duplex or Half Duplex Electrical PortFull Duplex Optical Port |
Compatible Receiver | CNFE2MC |
Installation | Installed inside a VG4-A-PA0, VG4-A-PA1, VG4-A-PA2, VG4‑A‑PSU1, or a VG4‑A‑PSU2 power supply box with supplied mounting hardware |
6. Kit available separately and must be installed inside the AUTODOME power supply box. | |
Description | Interchangeable modules available for use with MMF or SMF optical fiber. |
Data Interface | Ethernet |
Data Rate | 10/100 Mbps IEEE 802.3 Compliant |
Weight (all SFP modules) | 0.23 kg (0.05 lb) |
Dimensions (LxWxH) | SFP-2, SFP-3: 55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.) SFP-25, SFP-26: 63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.) |
Type | Connector , Wavelength (transmit / receive) , Max. Distance |
SFP-2 | MMF , Duplex LC , 1310 nm / 1310 nm , 2 km (1.2 miles) |
SFP-3 | SMF , Duplex LC , 1310 nm / 1310 nm , 20 km(12.4 miles) |
SFP-25 | MMF , Single SC , 1310 nm / 1550 nm , 2 km(1.2 miles) |
SFP-26 | MMF , Single SC , 1550 nm / 1310 nm , 2 km(1.2 miles) |
Fiber Compatibility | |
Optical Fiber Compatibility, MMF | 50/125 µm MMF. For 50/125 µm fiber, subtract 4 dB from the specified optical budget value. Must meet or exceed fiber standard ITU-T G.651. |
Optical Fiber Compatibility, SMF | 8–10/125 µm SMF. Must meet or exceed fiber standard ITU-T G.652. |
Optical Distance Specifications | Specified transmission distances are limited to the optical loss of the fiber and any additional loss introduced by connectors, splices, and patch panels. The modules are designed to operate over the entire optical loss budget range, so they do not require a minimum loss in order to operate. |
Sectors/Titling | 16 independent sectors with a 20-character title/sector |
Masking | 24 individually configurable privacy masks |
Pre-positions | 256, each with a 20-character title |
Guard Tours | Two (2) types of tours: Recorded tours – two (2) Preset tour – one (1), consisting of up to 256 scenes, consecutively |
Supported Languages | English, Chinese, Dutch, French, German, Italian, Japanese, Polish, Portuguese, and Spanish |
Power, Camera | RJ-45 10/100 Base-TX Ethernet (High Power-over-Ethernet (High PoE)) or PoE+ (IEEE 802.3at, class 4 standard)21-30 VAC, 50/60 Hz |
Power, Heater | RJ-45 10/100 Base-TX Ethernet (High Power-over-Ethernet (High PoE))21-30 VAC, 50/60 Hz |
Video and Control | RJ-45 10/100 Base-TX Ethernet |
Alarm Inputs (7) | 2 supervised, 5 non-supervisedProgrammable for “normally open” or "normally closed" |
Alarm Outputs (4) | 1 dry contact relay, 3 open collector/transistor outputs32 VDC @ 150 ma max. |
Audio | 1 x mono line in, 1 x mono line out |
Signal line in | 12 kOhm typical, 1 Vrms max |
Signal line out | 1 Vrms at 1.5 kOhm, typical |
In-Ceiling(with acrylic bubble) | Pendant(with acrylic bubble) |
Ingress Protection Rating/ Standard | IP54, Plenum rated , IP66,,NEMA 4X |
Operating Tempera-ture (with heater wired) | -10 to +40 °C(+14 to +104 °F) , -34 to +74 °C(-30 to +165 °F)(in accordance with NEMA TS 2-2003 (R2008), section 2.1.5.1) -40 to +55 °C(-40 to +131 °F)(continuous operation) |
Operating Tempera-ture (without heater wired) | -10 to +55 °C(+14 to +131 °F)(continuous operation) |
Storage Tempera-ture | -40 to +60 °C(-40 to +140 °F) , -40 to +60 °C(-40 to +140 °F) |
Operating Humidity | 0% to 90% RH, non-condensing , 0% to 100% RH, condensing 7 |
NEMA TS 2-2003 (R2008), para 2.1.5.1 using fig. 2.1 test profile | -34 ºC to +74 ºC (-30 ºF to +165 ºF) |
Dimensions | See dimensional drawings. |
Weight | In-ceiling: 2.59 kg (5.71 lb) Indoor/Outdoor Pendant: 3.07 kg (6.77 lb) |
Bubble Size | 153.1 mm diameter (6.03 in.) |
Construction Material, Housing | In-ceiling: Magnesium Pendant: Cast aluminum |
Construction Material, Bubble | In-ceiling: HD High-resolution acrylic Pendant: High-resolution acrylic |
Standard Color | White (RAL 9003) |
Standard Finish | Powder coated, sand finish |
Bubbles | |
In-ceiling | |
Clear HD high-resolution acrylic | VGA-BUBHD-CCLA |
Tinted HD high-resolution acrylic(Included with in-ceiling camera models.) | VGA-BUBHD-CTIA |
Pendant | |
Clear high-resolution acrylic(Included with pendant camera models.) | VGA-BUBBLE-PCLA |
Tinted high-resolution acrylic | VGA-BUBBLE-PTIA |
Clear rugged IK10-rated nylon* | VGA-BUBBLE-IK10 |
Pendant Arm Mounts | |
Wall Arms | VG4-A-PA0 (no transformer) VG4-A-PA1 (120 VAC transformer) VG4-A-PA2 (230 VAC transformer) |
Pendant Arm with Wiring | VG4-PEND-ARM |
Mounting plate for VG4-PEND-ARM | VG4-PEND-WPLATE |
Trim skirt for VG4 Series Power Supplies | VG4-A-TSKIRT |
Optional Mounting Plates for Arm Mounts | |
Corner Mounting Plate | VG4-A-9542 |
Pole Mounting Plate | VG4-A-9541 |
Pendant Pipe Mounts | |
Pipe Mount Kit | VG4-A-9543 |
Pendant Roof Mounts | |
Roof (Parapet) Mount(VG4-A-9543 Pipe Mount Kit required. Available separately.) | VGA-ROOF-MOUNT (with 1.5-inch NPT tapered male threads) |
Optional Mounting Plates for Roof Mounts | |
Flat Roof Adapter for Parapet Mount | LTC 9230/01 |
In-ceiling Support Kits | VGA-IC-SP (Bracket for suspended or drop ceilings) |
Autodome IP 7000 HD Ordering Information
Product Code | Description |
VG5-7220-CPT5 | AUTODOME IP 7000 HD (20x In-Ceiling) Superb quality indoor, in-ceiling PTZ dome camera with 1080p HD resolution; 20x optical zoom; IVA; PoE; iSCSI/SD; multiple pre-programmed user modes; H.264 quad-streaming (CPP4); tinted bubble. Rated IP54. |
VG5-7220-EPC5 | AUTODOME IP 7000 HD (20x Indoor/Outdoor Pendant) Superb quality indoor/outdoor pendant PTZ dome camera with 1080p HD resolution; 20x optical zoom; IVA; PoE; iSCSI/SD; multiple pre-programmed user modes; H.264 quad-streaming (CPP4); clear bubble. Rated IP66. |